Bedienungsanleitung Siemens LU63LCC20 (Seite 6 von 12) (Englisch)

788824

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Operating the appliance

These instructions apply to several appliance variants. It is

possible that individual features are described which do not

apply to your appliance.

Note: Switch on the extractor hood when you start cooking and

switch it off again several minutes after you have finished

cooking. This is the most effective way of removing the kitchen

fumes.

Note: Fold the glass cover forwards. This increases the

extraction area.

Control panel

Setting the fan

Note: Always adjust the fan strength to meet current conditions.

If there is a large build-up of steam or fumes, select a high fan

setting.

Switching on

1. Press the a1 button.

Note: If the fan is switched on, an LED lights up.

The fan starts up at the speed to which it was last set.

2. Press the 2 or 3 button to set another fan speed.

Switching off

Press the a button.

Lighting

The lighting can be switched on and off independently of the

ventilation.

Press the = button.

Cleaning and maintenance

: Risk of burns!

The appliance becomes hot during operation. Allow the

appliance to cool down before cleaning.

: Risk of electric shock!

Penetrating moisture may result in an electric shock. Clean the

appliance using a damp cloth only. Before cleaning, pull out the

mains plug or switch off the circuit breaker in the fuse box.

: Risk of electric shock!

Do not use any high-pressure cleaners or steam cleaners,

which can result in an electric shock.

: Risk of injury!

Components inside the appliance may have sharp edges. Wear

protective gloves.

Cleaning agents

To ensure that the different surfaces are not damaged by using

the wrong cleaning agent, observe the information in the table.

Do not use any of the following:

■Harsh or abrasive cleaning agents,

■Cleaning agents with a high alcohol content,

■Hard scouring pads or cleaning sponges,

■High-pressure cleaners or steam cleaners.

Wash new sponge cloths thoroughly before use.

Follow all instructions and warnings included with the cleaning

agents.

Explanation

‚1Switches the fan on/off

2 Switches on fan speed 2

3 Switches on fan speed 3

=Switches the lighting on/off

Area Cleaning agent

Stainless steel Hot soapy water:

Clean with a dish cloth and then dry

with a soft cloth.

Clean stainless steel surfaces in the

grind direction only.

Special stainless steel cleaning prod-

ucts are available from our after-sales

service or from specialist retailers.

Apply a very thin layer of the cleaning

product with a soft cloth.

Painted surfaces Hot soapy water:

Clean using a damp dish cloth and dry

with a soft cloth/towel.

Do not use any stainless steel cleaners.

Aluminium and plas-

tic

Glass cleaner:

Clean with a soft cloth.

Glass Glass cleaner:

Clean with a soft cloth. Do not use a

glass scraper.

Controls Hot soapy water:

Clean using a damp dish cloth and dry

with a soft cloth/towel.

Risk of electric shock caused by pene-

trating moisture.

Risk of damage to the electronics from

penetrating moisture. Never clean

operating controls with a wet cloth.

Do not use any stainless steel cleaners.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens LU63LCC20 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens LU63LCC20

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info