Bedienungsanleitung Siemens REV17 (Seite 1 von 2) (Englisch)

462306

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

REV17 User Guide Room temperature controller REV17 Page 1 of 2

REV17 User Guide SIEMENS BUILDING TECHNOLOGIES

Slider Positions

RUN

Slider positions

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Time setting

Date Day / Month

/ Year

Weekdays 1-5

Weekend 6-7

1, 2 or 3

Comfort phases

Start time

Comfort phase 1

Temperature

Comfort phase 1

End

Comfort phase 1

Start time

Comfort phase 2

Temperature

Comfort phase 2

End

Comfort phase 2

Start time

Comfort phase 3

Temperature

Comfort phase 3

End

Comfort phase 3

Saving temp.

time program

Start

Absence

Temperature

Absence

End

Absence

Temperature

remote control

If the selected operating mode does not support the setting, the time display shows PASS.

STEP Symbol

Programming

Initial Start Up - Enabling Battery Power

Remove the controller from the mounting base and pull out the black insulating tape tab from the battery compartment: The controller

turns on automatically. Re-insert the controller in the mounting base.

Language Selection

After startup, a welcome message appears for approx 2 minutes. Press a button to interrupt the message. Language selection starts

with “ENGLISH“ (factory setting). Press

or until your desired language appears. Press or move the slider to accept

your language choice.

Hint: if you choose the incorrect language, an Expert Level Reset will need to be performed. This is achieved by:

Pressing simultaneously the DIP switch reset button (on the back of the unit under the dip switch cover) and the

and

for 5 seconds: After this reset, all factory settings will be reloaded. This applies to both the slider settings and the

settings made on the expert level

Move the Slider to position 1 (time setting): Press

Setting Time:

or to set the time.

Slider in position 2 (date: day/month/year): Press

Setting Date:

or to set the date. (Note: the day of the week is automatically chosen)

Slider in position 3 (Monday- Friday weekdays

Weekday (1-5) and Weekend (6-7) Blocks:

, Saturday and Sunday weekend ): You will notice the flashing

or blocks in the top right hand corner. Press the or to toggle between both blocks.

Slider in position 4 (there are 3 comfort phases): Press

Comfort Phases:

or to set the comfort phases you desire.

Slider in position 5 (start time comfort phase 1): Press

Setting Time in Comfort Phase 1:

or to set the start time.

Hint: you will notice the flashing time cursor on the 24 hour time bar (at the bottom of the screen) corresponding with the

entered time, moves as you adjust the time with the

or buttons

Slider in position 6 (temperature comfort phase 1): Press

Setting Temperature in Comfort Phase 1:

or to set the temperature.

Slider in position 7 (end time comfort phase 1): Press

Setting Time to End Comfort Phase 1:

or to set the end time.

, ,

Slider positions 8…10 (comfort phase 2) and slider positions 11…13

(comfort phase 3): Same procedure as above for comfort phase 1.

Setting Time and Temperature for Comfort Phase 2 and 3:

Slider in position 14 (energy saving temperature in time switch programs Automatic and Exception day): Press

Setting Energy Saving Temperature from Monday to Sunday:

or to set the

temperature.

Note: The energy saving temperature is valid Monday through Sunday. It does not depend on operating mode "Continuous

energy saving".

Hint: If you do not want your heating to come on at night (or anytime it is controlling to the setpoint) then set this value low e.g. 3.0°C

RUN

Complete Programming Move the slider to RUN position and close the cover.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens REV17 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens REV17

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info