Bedienungsanleitung Siemens RMH760B (Seite 6 von 14) (Englisch)

521720

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

6 / 14

Siemens Operating Instructions RMH760B, RMK770 CE1B3133_en

Building Technologies Do you want to heat according to the heating program? 2015-03-31

Do you want to heat according to the heating program?

In room operating mode , the controller operates

according to the selected heating program.

Heating program

The heating program contains the start time and the

associated room operating mode (room setpoint) for all

phases of the 24-hour heating program. The heating

program has been entered for you. If you wish, you can

change the entries made to satisfy your personal needs.

If your plant comprises several heating circuits, you can

select the heating program for every heating circuit

separately (e.g. path: … > Heating circuit 2 > …).

Example of a heating program:

Tuesday

From 06:00 Comf

From 06:00: Comfort mode

From 11:30: Precomfort mode

From 12:30: Comfort mode

From 19:00: Precomfort mode

From 21:00: Economy mode

Please note that the heating program does not contain switching times but periods of time for the required temperature levels.

The switching times are calculated by the controller’s optimization function!

Do you want to change the daily heating periods?

General information about the heating program

In the heating program, you can set the daily heating peri-

ods to suit your individual needs. Each day can accommo-

date a maximum of 6 switching points; a room setpoint must

be assigned to each heating period.

In addition to the weekdays (Monday through Sunday), you

can program a special day, that is, a special 24-hour heating

program.

The special day will be activated when you make an entry

on the Holidays/special days menu (

page 9).

If your plant comprises several heating circuits, you can set

the heating program for every heating circuit separately (e.g.

path: … > Time switch 2 > … ).

Changes on the controller can be made only if the heating

program is predefined by the time switch in the controller.

Otherwise, it is an external operator station.

Prior to making entries, please observe

· First, always enter the start time of the heating period,

then the room operating mode of that period

· You have room operating modes

, and to choose

from. Adjust the associated setpoints on the Room

setpoints menu (

page 7)

· You can copy any 24-hour heating program to other days

Changing and canceling times and setpoints

1. Select the required day.

2. In the diagram, advance pointer

to the point in time to

be changed.

3. Set the required time.

Canceling the time: Reset the time via 00:00 until --

:-- appears.

4. Select the required setpoint.

5. If required, set additional times and select additional

setpoints.

Path:

Main menu

Heating circuit … > Time switch

…

Entering additional heating periods

1. Select the required day.

2. In the diagram, advance pointer

to the last point in

time of the current program.

3. Turn the OK knob by one notch;

--:-- ------ appears.

4. Set the required start time.

5. Select the required room operating mode.

Copying a 24-hour heating program

1. Select the day to be copied.

2. Turn the OK knob in clockwise direction until Copy to:

appears.

3. Press the OK knob.

4. The menu with the selection of days (week section,

individual weekdays, special day) appears.

5. Select the required weekday or week section.

6. Copy (press the OK knob).

New 24-hour program

The controller is supplied with a 24-hour program for every

day (including the special day). This means that you will

never have to create a new 24-hour program, but only

change an existing program.

Power off – heating program lost?

In the event of a power failure, the 24-hour programs en-

tered will be maintained, independent of the duration of the

power failure.

First, prepare a 7-day schedule for the daily heating periods and setpoints – this will facilitate entry into the controller!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens RMH760B Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens RMH760B

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info