657261
96
Zoom out
Zoom in
Vorherige Seite
1/108
Nächste Seite
96/108
Siemens Basic Documentation RVP340, RVP350, RVP351 CE1P2545en
Building Technologies 21 Handling 15.03.2011
3 buttons are provided for manual control:
1 button for activating manual control. An LED indicates when manual control is
active. Manual control is quit by pressing the same button again or by pressing
any of the operating mode buttons
2 buttons for manual positioning commands. In plants with mixing valves or
2-port valves, the actuating device can be driven to any position by pressing
the respective button.
When pressing a button, the respective LED lights up
All positioning commands sent to the relays appear on the LCD.
Input and readjustment of all setting parameters, activation of functions and read-
ing of actual values and operating states are based on the operating line principle.
An operating line with an associated number is assigned to each parameter, each
actual value and each function.
A pair of buttons is used to select operating lines and readjust displays.
To select and readjust setting values, the procedure is as follows:
Buttons
Action Effect
Line selection buttons
Press
Selection of next lower operating line
Press
Selection of next higher operating line
Setting buttons
Press
Decrease of displayed value
Press
Increase of displayed value
The set value is adopted …
when selecting the next operating line,
by pressing any of the operating mode buttons.
If input of --.- or --:-- is required, button
or must be pressed until the re-
quired display appears. Then, the display maintains --.- or --:--.
The operating lines are combined in the form of blocks. To reach a specific operat-
ing line of a function block quickly, the other blocks can be skipped, so that it is not
necessary to go through all the other lines. This is made possible by using 2 button
combinations:
Action Effect
Keep depressed and press
Selection of next higher function block
Keep depressed and press
Selection of next lower function block
Buttons and displays
for manual control
Display of positioning
commands
Operating line principle
Buttons
Block skip function
96

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Siemens RVP340 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Siemens RVP340

Siemens RVP340 Bedienungsanleitung - Deutsch - 108 seiten

Siemens RVP340 Bedienungsanleitung - Französisch - 112 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info