Bedienungsanleitung Siemens RWC2.1r - 2238 B 1355 (Seite 2 von 2) (Englisch)

620373

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Examples of adjustments

----

SeUlng the time switch for 1 daily programme

e.g. in the case where the wife or other family member is at

home during the day

- Grey rider ..I» set to 6: Comfort heating begins at 06.00 hrs,

so that the apartment is comfortably warm by 07.00 hrs.

- Black rider ..4» (!) set on the graduation mark between 22 and

23: Comfort heating ends at 22.30 hrs, after which there is low

level heating or «no heating» (depending on how switch B has

been switched). Riders «2.. and «3.. can be placed at any pos-

ition!

SeUlng the time switch for 2 daily programmes

e.g. for households where all members of the family are away

from home during the day

- Grey rider set on the graduation mark between 5 and 6:

Comfort heating begins at 05.30 hrs to allow for a comfortable

breakfast at about 06.30 hrs.

- Black rider ..2» set on the graduation mark between 8 and 9:

Comfort heating ends at 08.00 hrs since shortly after 09.00 hrs

all family members will leave the house.

- Grey rider ..3» set on the graduation mark between 15 and 16:

Comfort heating begins again at 15.30 hrs to allow the apart-

ment to become comfortably warm by 16.30 hrs.

- Black rider ..4» set at 22: Comfort heating ends at 22.00 hrs,

since itisBssumed tnat normally all family members woufd

retire for the n~ht at 22.00 hrs.

."" ;4) in order to switch on this «double

~ .- .

programme", the heating pro.

// ' ,fo\ 11, ",

gramme selector switch C ,must

I ~' -:. " ~ be switched to «2x».

/ , /

I ~ ." --

f ' :,. \

<t . ~ 1

I I

\ I

./ ," /

\ ,", ~," <t

, ~"/~I \." /

~/~. /

'''' /'

(I; ',..-/

-+:-

On work-free weekends, this switch must be switched over to

«1x" so that there is comfortable warmth during these two days,

Le. according to this example, from 06.30 hrs to 22.00 hrs. It is

then changed back to «2x" on Sunday evening.

Switch D

The position of this small switch indicates which mode of heat-

ing operation the time switch has actuated:

If the switch is to the left, i.e. it

tends towards the sun symbol, the

comfort heating operation is switched

on, insofar as switch C is at «1x" or

«2x".

If the switch is to the right, Le. if it

tends towards the moon symbol, the

comfort heating operation is swit-

ched off, and the position of switch

B dictates the heating operation

mode.

With switch D you could, however, also reverse the switching

programme of the time switch: if, for example, you wish to stay

up later at night and still have comfortable heating, and the time

switch has already switched off the comfort heating operation, so

that the switch D is at the right hand position, shift it

- ifnecess-

ary by pressing lightly- towards the «sun" symbol and the com-

fort heating will switch on again! In the same way, by reversing

the direction, you can stop the comfort heating operation at any

time, for example, if you suddenly decide to leave the house for

several hours on a Sunday. Ifyou once forget to reset this

switch, it is not critical because the time switch will do this auto-

matically during the next programme change. T~rn the clock

disc a few times and observe what happens; this will help you

get accustomed to the programmes. But do not forget:

The type of programme indicated by switch D is only valid if the

heating programme selector switch is on «1x" or «2x". If switch

C is at position «sun" or «moon" however, the switching func-

tions of the time switch and the switch D are invalidated. These

switching positions are necessary for:

Special programmes

1. Uninterrupted comfort heating operation

For example, in cases of sickness or festivities which J~st until

the early morning.

Position the switch C at the sun sym-

bol. Do not change any other settings.

2. Continuous low level heating

For example, in the case of several days of absence in winter

(danger of frost!)

Shift switch C to the moon

symbol and switch B to «I". Set

the room temperature to about

120 C; this suffices as a pro-

tection against frost.

11]

.~..

3. No heating

Shift the switch C to the

moon symbol and the switch

B to «0".

In summer, also shift this

slider A completely down-

wards.

Now select with switches Band C the heating programme which

you will require in the near future, set the appropriate time at the

triangular time marker (note: 24-hour round-the-clock time) and

then switch on the heating system with the main switch.

Signal lamp E

The signal lamp remains lighted as long as the controller con.

trois the room temperature, whether in comfort heating operation

or in low level heating operation. If it does not light, either the

heating is not switched on (switch B at «0..) or there is no power

supply. Check the fuse! After the fault has been corrected, Im-

mediately set the time switch correctly or your heating pro-

gramme willlag behind the actual time.

If, on occasion. «something is the matter" with the room temper-

ature, do not call your heating installer straight away, but rather

check first whether fuel and power supply are available and then

check all settings on the time switch and the contr,oller! When

doing this, do not forget the 24-hour time: the 6 on the clock is

06.00 hrs and not 18.00 hrs, etc.: old habits can cause errors to

be repeated. . . and the service man will have to be paid even if

his visit waS quite unnecessary!

Siemens RWC2.1r - 2238 B 1355 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info