Bedienungsanleitung Siemens TI924301RW - EQ.9 s400 (Seite 28 von 224) (Deutsch)

710197

Zoom out

Zoom in

Vorherige Seite

1/224

Nächste Seite

en Service programmes

. Service programmes

Se r v i c e pr ogr ammes

Every so often – the exact frequency

depends on usage and water hardness

– one of the following messages will

appear in the display in place of the

coffee selection:

■ Rinse milk system

■ Run descaling program urgently!

■ Run cleaning program urgently!

■ Run calc'nClean program urgently!

The appliance should immediately be

cleaned or descaled using the

appropriate programme. Alternatively,

the two processes Descale and Clean

can be carried out together using the

calc’nClean function. Failure to carry out

the service programme according to the

instructions may damage the appliance.

You can also start the service

programmes at any time without having

to wait for a reminder to appear in the

display. Press the $/± button, select the

desired programme and run it.

Notes

■ Important: If descaling is not

performed on the appliance in good

time, the following appears

"Descaling programme overdue.

Device will shortly be locked!".

Immediately perform the descaling

process in accordance with the

instructions. If the appliance is

locked, it can only be operated

again once descaling has been

carried out.

■ Caution! For each of the service

programmes, use descaling and

cleaning agents as described in the

instructions and observe the

(relevant) safety information.

■ Do not drink the liquids.

■ Never use citric acid, vinegar or any

vinegar-based agents to descale the

appliance.

■ For cleaning and descaling, only use

the tablets intended for such

purpose.They have been specially

developed for this appliance, and

new stocks can be ordered through

customer service. ~ "Accessories"

on page 12

■ Never insert descaling tablets or

other products into the grounds

compartment.

■ Never interrupt the service

programme.

■ Prior to starting a service

programme, remove, clean and

re-insert the brewing unit. Rinse the

milk system.

■ At the end of a service programme,

wipe down the appliance using a

soft, damp cloth to immediately

remove any descaler residue. This

residue may cause corrosion.

■ New sponge cloths may contain

salts. Salts can cause rust film on

stainless steel, so cloths must

always be washed out thoroughly

before use.

■ Using a water filter increases the

intervals until a service programme

needs to be performed.

■ If one of the service programmes is

interrupted, e.g. by a power failure,

proceed as follows:

The appliance automatically starts a

special rinsing process.

1. Rinse out the water tank.

2. Pour in fresh, still water up to the

"max" marking and confirm.

The programme starts and rinses the

appliance.Duration: approx.

2 minutes.

3. Empty, clean and re-insert the drip

tray.

4. Empty, clean and re-insert the milk

container.

The programme has finished. The

appliance is ready for use again.

5. Press $/± button to close the

programme.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens TI924301RW - EQ.9 s400 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens TI924301RW - EQ.9 s400

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info