Home Connect en
69
1. Press $/± button, turn the rotary
selector to the left and select "Home
Connect setting".
2. Press the rotary selector.
3. Press the right-hand navigation
button under "select".
4. Use the rotary selector to select
"Disconn. from network".
5. Press the right-hand navigation
button under "select". The appliance
is disconnected from the network
and app.
6. Press $/± button to close the menu.
Note: Information about the WLAN
network is cleared.
Connect to the app
The Home Connect app can be
installed on any number of mobile
devices, which can then be used to
connect to the fully automatic coffee
machine. The fully automatic coffee
machine must already be connected to
the WLAN network.
1. Open the app on the mobile device.
2. Press $/± button, turn the rotary
selector to the left and select "Home
Connect setting".
3. Press the rotary selector.
4. Press the right-hand navigation
button under "select".
5. Use the rotary selector to select
"Connect to app".
6. Press the right-hand navigation
button under "select" to connect the
appliance to the app.
7. Press $/± button to close the menu.
Remote Start
If you wish e.g. to start drinks
dispensing on the fully automatic coffee
machine via a mobile device, Remote
start must be activated.
Caution!
Risk of scalding!
In the event of an unintentional remote
start, third parties may be scalded if
they insert their hands under the coffee
outlet. Therefore, please ensure that no
persons, in particular children, or
objects are endangered if the appliance
is started remotely by accident.
Note: The text field "Turn on remote
start" is is only visible if connection with
Home Connect has been successfully
completed. If Remote start is switched
off, only the modes of the fully
automatic coffee machine are displayed
in the Home Connect app.
1. Press $/± button, turn the rotary
selector to the left and select "Home
Connect setting".
2. Press the rotary selector.
3. Press the right-hand navigation
button under "select".
4. Use the rotary selector to select
"Turn on remote start" in the display.
5. Press the right-hand navigation
button under "select".
6. Press $/± button to close the menu.
Device info
Display for network and device
information
1. Press $/± button, turn the rotary
selector to the left and select "Home
Connect setting".
2. Press the rotary selector.
3. Press the right-hand navigation
button under "select".
4. Use the rotary selector to select
"Appliance info" on the display.
5. Press the right-hand navigation
button under "select".
The SSID, IP, MAC address and
serial number of the appliance are
displayed for a few seconds.
6. Press $/± button to close the menu.
