Bedienungsanleitung Siemens TK 911 N2 FR (Seite 22 von 108) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

111260

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

● Dip the tube into a vessel containing milk.

● Remove the small drip tray

(up to

around 14 cm in height).

● Place a large glass under the coffee

dispenser

and direct the nozzle of the

frothing attachment

into the glass.

● Place the

Nespresso

-capsule on the

lit balcony

, with the membrane

downwards (Fig.

● Press the button

(latte macchiato).

An optimum mix of frothed milk and coffee

will now automatically ﬂ ow into the cup.

Info

: You can halt the dispensing of milk or

coffee respectively at any time by pressing

the button

(Cappuccino) or

(latte

macchiato).

Permanently changing the quantity of

liquid

The preset quantity of milk and coffee for

the preparation of cappuccino and latte

macchiato can be changed.

● Prepare the appliance with milk and

coffee.

● Keep the button

(cappuccino) or

(latte macchiato) depressed until the

desired quantity of milk has been fed

through. During this time

Macchiato

Cappuccino

ﬂ ashes in the display.

Release the button

(Cappuccino) or

(Latte macchiato), and the appliance will

steam brieﬂ y.

● Now keep the button

(Cappuccino)

(Latte macchiato) pressed until the

desired quantity of coffee has been fed

through. During this time

Macchiato

Cappuccino

ﬂ ashes in the display.

As soon as the process is completed, the

display indicates

Ready

Info

: If the quantity of coffee is to remain

unchanged, the procedure can also be

ended after changing the quantity of milk.

● Press button

(Stand by).

Ready

appears in the display.

Preparing hot water

This function enables hot water to be

prepared, e.g. for a cup of tea.



Danger of skin burns

The nozzle becomes very hot, and

should only be grasped by the plastic

section.

● Screw the nozzle

onto the adapter 8 of

the steam pipe

(Fig.

● Hold a glass or cup under the nozzle

● Press button

(hot water).

Hot water is dispensed from the nozzle

● To stop, press the button

(hot water)

again.

Wait

appears brieﬂ y in the display.

The display then indicates

Ready

once

more.

Heating liquids with

steam



Danger of scalding

Steam is very hot, and may cause the

liquid to splutter.

● Screw the nozzle

in place (Fig.

● Press the steam button

Steam

and

wait

ﬂ ash alternately in the

display.

As soon as

Steam

and

ready

ﬂ ash

alternately in the display, steam can be

drawn off.

● Immerse the nozzle

deeply into the

liquid, making sure it does not touch the

bottom of the vessel.

● Press button

(steam).

● Slowly trace circles through the liquid in

the vessel. The liquid is heated up.

● As soon as the liquid is hot, press button

(steam) once again.

The display alternates between

Steam

and

ready

The appliance now automatically cools

down for around 2 minutes. The display

once again indicates

Ready

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens TK 911 N2 FR Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info