Bedienungsanleitung Siemens TS 25350 (Seite 13 von 102) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

113174

Zoom out

Zoom in

Vorherige Seite

1/102

Nächste Seite

Trouble shooting

Problem Possible causes Solution

The steam generator

does not come on.

• There is a connection problem.

• The main power button is not switched

on.

• Check the mains cable, the plug and the socket.

• Set the main power (6) button to the “I” position.

The iron does not

heat up.

• The main power button is not switched

on.

• The temperature control knob is set to

the “min” position.

• Set the main power (6) button to the “I” position.

• Set the temperature control knob (10) to the desired

position.

The iron begins to

smoke when switched

on.

• During ﬁrst use: Certain components

on the appliance have been lightly

greased at the factory and may

produce a little smoke when initially

heated.

• During later use: the soleplate may be

soiled.

• This is completely normal and will stop after a short

while.

• Clean the soleplate according to the cleaning

instructions in this manual.

Water ﬂows through

the holes on the sole

plate.

• The steam function is being used

before it has reached temperature.

• The water is condensing inside the

pipes because steam is being used for

the ﬁrst time or has not been used for a

long time.

• Reduce the steam ﬂow when ironing at low

temperatures (Variable steam control (4)).

• Point the iron away from the ironing area and

press the steam release button (11) until steam is

produced.

Dirt comes out

through the sole plate.

• There is a build-up of scale or minerals

in the steam tank.

• Chemical products or additives have

been used.

• Use tap water mixed 50% with distilled or

demineralised water. If the tap water in your district is

very hard, mix tap water with distilled water 1:2.

• Clean the sole plate with a damp cloth.

• Never add products to the boiler water.

The iron does not

produce any steam.

• The boiler is not switched on or the

water tank is empty.

• The water tank is not ﬁtted onto the

housing correctly.

• The steam regulator is set to the

minimum position.

• Set the main power (6) button to the “I” position

and/or ﬁll the water tank.

• Fit the water tank back onto the housing correctly

(you will hear a click).

• Increase the steam ﬂow by turning the steam control

(4).

The ironed garment

turns dark and/or

sticks to the soleplate.

• The selected temperature is too high

and has damaged the garment.

• Select a suitable temperature for the material being

and clean the sole plate with a damp cloth.

The soleplate turns

brown.

• This is a regular consequence of

usage.

• Clean the soleplate regularly with a damp cloth.

The iron does not stop

steaming after placing it

on the pad.

• “Intelligent steam” function activated. • Just press the trigger once again and the iron will

stop steaming at once.

The appliance makes

a pumping sound.

• Water is being pumped into the steam

tank.

• The sound will not stop.

• This is normal.

• If the sound will not stop, do not use the steam

generator and contact an authorised technical

service centre.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens TS 25350 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info