Bedienungsanleitung Siemens Unify OpenStage 10 T - HiPath 500 - HiPath 3000 (Seite 24 von 38) (Englisch)

680269

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

24 Administration

• International access code:

International prefix used to dial to another country, e.g. "00" in Germany and United Kingdom.

Maximum length: 5.

• Operator code:

List of extension numbers for a connection to the operator. The numbers entered here are not

converted to canonical format.

Maximum length: 50. (Optional)

• Emergency number:

List of emergency numbers to be used for the phone. If there are more than one numbers, they

must be separated by commas. The numbers entered here are not converted to canonical for-

mat.

Maximum length: 50. (Optional)

• Initial extn. digits:

List of initial digits of all possible extensions in the local enterprise network. When a call number

could not be matched as a public network number, the phone checks if it is part of the local en-

terprise network. This is done by comparing the first digit of the call number to the value(s) given

here. If it matches, the call number is recognized as a local enterprise number and processed

accordingly. 

If, for instance, the extensions 3000-5999 are configured in the HiPath, each number will start

with 3, 4, or 5. Therefore, the digits to be entered are 3, 4, 5.

• Internal numbers

– Local enterprise form:

Default value. Any extension number is dialled in its simplest form. For an extension on the

local enterprise node, the node ID is omitted. If the extension is on a different enterprise node,

then the appropriate node ID is prefixed to the extension number. Numbers that do not corre-

spond to an enterprise node extension are treated as external numbers.

– Always add node:

Numbers that correspond to an enterprise node extension are always prefixed with the node

ID, even those on the local node. Numbers that do not correspond to an enterprise node ex-

tension are treated as external numbers.

– Use external numbers:

All numbers are dialled using the external number form.

• External numbers

– Local public form:

Default value. All external numbers are dialled in their simplest form. Thus a number in the lo-

cal public network region does not have the region code prefix. Numbers in the same country

but not in the local region are dialled as national numbers. Numbers for a different country are

dialled using the international format.

– National public form:

All numbers within the current country are dialled as national numbers, thus even local num-

bers will have a region code prefix (as dialling from a mobile). Numbers for a different country

are dialled using the international format.

– International form:

All numbers are dialled using their full international number format.

• External access code

– Not required:

The access code to allow a public network number to be dialled is not required.

– For external numbers:

Default value. All public network numbers will be prefixed with the access code that allows a

number a call to be routed outside the enterprise network. However, international numbers that

use the + prefix will not be given access code.

To enable the phone to discern internal numbers from external numbers, it is crucial that a

canonical lookup table is provided (

Section , "Canonical Dial Lookup").

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens Unify OpenStage 10 T - HiPath 500 - HiPath 3000 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens Unify OpenStage 10 T - HiPath 500 - HiPath 3000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info