Bedienungsanleitung Siemens VS 04G2300 (Seite 14 von 104) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

77442

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

deen

Figure

The appliance can also be carried using one of the

two handles, for example when vacuuming steps.

When the work is done

Figure

Unplug the vacuum cleaner.

Tug the power cord briefly and let go. The cable then

rewinds automatically.

Figure

To store or transport the vacuum cleaner, use the

storage aid on the underside of the vacuum cleaner.

Stand the vacuum cleaner up on its end. Slide the

catch on the floor tool into the groove on the

underside of the appliance.

Changing the dust bag

Replacing the dust bag

Figure

a)If the dust bag change indicator is completely yellow

when the floor tool is lifted from the floor and the

highest suction power is selected, the dust bag must

be changed, even if it is not yet full. Even if the dust

bag is not full, it may still need changing, due to the

type of dust which has been vacuumed.

First check that the nozzle, suction pipe and flexible

tube are not blocked, as this would also lead to dust

bag change indicator being triggered.

b)The handle can easily be detached from the hose to

remove blockages.

Figure

Open the lid by moving the locking lever in the

direction of the arrow.

Figure

a)Seal the dust bag by pulling the sealing plate, and

remove the bag.

b)Slide the new dust bag into the holder up to the

stop.

Caution: the lid will only close if a dust bag has been

inserted.

Cleaning the motor protection filter

The motor protection filter should be cleaned regularly

by knocking out the dirt and rinsing.

Figure

Open the dust bag compartment lid (see Fig. 22).

Pull out the motor protection filter in the direction of

the arrow.

Clean the motor protection filter by tapping it out.

If it is very dirty, the motor protection filter should

be rinsed. The filter must then be left to dry for at

least 24 hours.

After cleaning, slide the motor protection filter into

the vacuum cleaner and close the dust bag

compartment lid.

Replacing the micro-hygiene filter

This should be replaced with every replacement filter

pack

Figure

Open the dust bag compartment lid (see Fig. 22).

Release the filter holder by moving the locking lever

in the direction of the arrow.

Remove the micro-hygiene filter. Insert the new

micro-hygiene filter into the appliance.

Insert the filter holder into the appliance until it

engages.

Replacing the micro/activated carbon filter

If your appliance is equipped with a micro/activated

carbon filter, this should be replaced every six months.

Figure

Open the dust bag compartment lid (see Fig. 22).

Release the filter holder by moving the locking lever

in the direction of the arrow.

Remove the micro active carbon filter.

Insert the new micro active carbon filter.

Insert the filter holder into the appliance until it

engages.

Replacing the HEPA filter

If your appliance is equipped with a HEPA filter, this

should be replaced once a year.

Figure

Open the dust bag compartment lid (see Fig. 22).

Release the Hepa filter by moving the locking lever in

the direction of the arrow and remove it from the

appliance.

Insert the new HEPA filter until it engages.

After vacuuming fine dust particles, clean the motor

protection filter and, if necessary, replace the micro-

hygiene filter, micro/activated carbon filter or HEPA

filter.

Care

Always switch off the vacuum cleaner and disconnect

the power cord from the mains before cleaning the

vacuum cleaner. The vacuum cleaner and plastic

accessories can be cleaned with a commercial plastic

cleaner.

Do not use a scourer, glass-cleaning agent or all-

purpose cleaning product. Never immerse the

vacuum cleaner in water.

The dust compartment can, if necessary, be cleaned

with a second vacuum cleaner or simply wiped with a

dry cloth or dusting brush.

Subject to technical modifications.

27*

26*

25*

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens VS 04G2300 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info