Bedienungsanleitung Siemens vs01g600 (Seite 15 von 119) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

315588

Zoom out

Zoom in

Vorherige Seite

1/119

Nächste Seite

Ⅲ

To switch off the appliance, press the control button

in again down to the stop. This will leave the control

button retracted in the appliance.

Figure Controlling the suction level

The required suction level can be set to any level

required by turning the control knob in the direction

of the arrow.

Ⅲ

Low suction range =>

For vacuuming delicate fabrics,

e.g. curtains.

Ⅲ

Medium suction range =>

For daily vacuuming of lightly

soiled floors.

Ⅲ

High suction range =>

For vacuuming durable floor

coverings,

hard floors and for heavily soiled surfaces.

Vacuuming

Figure

Adjusting the floor tool:

Ⅲ

Rugs and carpets =>

Ⅲ

Hard floors =>

Figure

Remove the upholstery nozzle and crevice nozzle

from the accessories holder as illustrated.

Figure Vacuuming with accessories

Attach the nozzles to the tube or handle as required:

a)Crevice nozzle for vacuuming crevices and corners,

etc.

b)Upholstery nozzle for vacuuming upholstered

furniture, curtains, etc.

c)Hard furnishings brush

For cleaning window frames, cabinets, mouldings,

etc.

Figure

After use, push the crevice nozzle and upholstery

nozzle back into the accessories holder as indicated.

Hard-floor brush

Figure

For vacuuming hard floor coverings (tiles, parquet

flooring, etc.)

Push the telescopic tube into the connecting piece

of the hard-floor brush until it engages.

Press on the locking collar and pull out the telescop-

ic tube to disconnect.

14*

12*

Cleaning the hard-floor brush

Figure

a)Vacuum from below to clean the brushes.

b)Cut through threads and hairs wound round the

rollers using scissors.

Vacuum threads and hairs with the crevice nozzle.

Turbo brush

If your vacuum cleaner is equipped with a turbo brush,

please consult the accompanying instruction manual

for notes on its use and maintenance.

Figure

You can use the parking aid on the back of the

vacuum cleaner if you wish to stop vacuuming for a

short time.

Once you have switched off the vacuum cleaner,

slide the catch on the floor tool into the recess on

the rear of the appliance.

Figure

The appliance can also be carried using the carrying

handle when vacuuming steps, for example.

When the work is done

Figure

Unplug the vacuum cleaner.

Tug the power cord briefly and let go. The cable then

rewinds automatically.

Figure

To store/ transport the vacuum cleaner, use the

storage aid on the underside of the vacuum cleaner.

Stand the vacuum cleaner up on its end. Slide the

catch on the floor tool into the groove on the

underside of the appliance.

Changing the dust bag and filters

Replacing the dust bag

Figure

a)If the dust bag change indicator is completely yellow

when the floor tool is lifted from the floor and the

highest suction power is selected, the dust bag must

be changed, even if it is not yet full. In this case it is

essential to change the dust bag due to the type of

material it contains.

First check that the nozzle, suction pipe and flexible

hose are not blocked, as this would also lead to the

dust bag change indicator being triggered.

b)The handle can easily be detached from the hose to

remove blockages.

20*

15*

Dependent on model

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens vs01g600 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info