9
en
Figure Controlling the suction level
a) The required suction level can be set to any level
required by turning the control knob in the direction of
the arrow.
Low suction range
(1 bar on the indicator lights up)
For vacuuming delicate fabrics,
e.g. curtains.
Medium suction range
(2 bars on the indicator light up)
For daily vacuuming of lightly
soiled floors.
High suction range
(all 3 bars on the indicator light up)
For vacuuming durable floor coverings, hard floors and
for heavily soiled surfaces.
b) Depending on the type of floor covering, the suction level
is adjusted automatically once the control button is
turned beyond the retention point.
All three bars on the indicator light up. You can then use
the bar display to check the suction level setting.
!
Caution: delicate materials such as curtains must not be
vacuumed using the automatic setting.
Vacuuming
Figure
Adjusting the floor tool:
Ⅲ
Rugs and carpets =>
Ⅲ
Hard floors =>
Figure
Remove the upholstery nozzle and crevice nozzle from
the accessories holder as illustrated.
Figure Vacuuming with accessories
Attach the nozzles to the tube or handle as required:
a) Crevice nozzle for vacuuming crevices and corners, etc.
b) Upholstery nozzle for vacuuming upholstered furniture,
curtains, etc.
c) Hard furnishings brush
For cleaning window frames, cabinets, mouldings, etc.
d) Hard-floor brush
For vacuuming hard floor coverings (tiles, parquet
flooring, etc.)
Figure
After use, push the crevice nozzle and upholstery nozzle
back into the accessories holder as indicated.
Turbo brush
If your vacuum cleaner is equipped with a turbo brush,
please consult the accompanying instruction manual for
notes on its use and maintenance.
13
12*
11
10
9
Figure
You can use the parking aid on the back of the vacuum
cleaner if you wish to stop vacuuming for a short time.
Once you have switched off the vacuum cleaner, slide
the catch on the floor tool into the recess on the rear of
the appliance.
Figure
The appliance can also be carried using the carrying
handle when vacuuming steps, for example.
When the work is done
Figure
Unplug the vacuum cleaner.
Tug the power cord briefly and let go. The cable then
rewinds automatically.
Figure
To store/ transport the vacuum cleaner, use the storage
aid on the underside of the vacuum cleaner.
Stand the vacuum cleaner up on its end. Slide the catch
on the floor tool into the groove on the underside of the
appliance.
Changing the dust bag and filters
Replacing the dust bag
Figure
a) If the dust bag change indicator is completely yellow
when the floor tool is lifted from the floor and the highest
suction power is selected, the dust bag must be
changed, even if it is not yet full. In this case it is
essential to change the dust bag due to the type of
material it contains.
First check that the nozzle, suction pipe and flexible hose
are not blocked, as this would also lead to the dust bag
change indicator being triggered.
b) The handle can easily be detached from the hose to
remove blockages.
Figure Opening the lid
Ⅲ
Press the control button down to the stop and leave it
retracted in the appliance.
!
Caution: Only open the lid with the control button
retracted.
Ⅲ
Open the lid by moving the locking lever in the direction
of the arrow.
Figure
a) Seal the dust bag by pulling the sealing strip and remove
the bag. .
b) Slide the new dust bag into the holder to the stop.
!
Caution: the lid will only close if a dust bag has been
inserted.
20
19
18*
17
16
15
14
