Bedienungsanleitung Siemens VSZ4GXTRM1 (Seite 74 von 136) (Alle Sprachen)

630759

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

irst check that the nozzle, suction pipe and ﬂexible

ose are not blocked, as this would also lead to the

dust bag change indicator being triggered.

● The hand grip can easily be detached from the hose

to remove blockages.

Figure Opening the lid

)Unlock the lid by pulling on the locking lever in the

direction of the arrow.

b)Open the lid in the direction of the arrow.

igure

a)Close the dust bag by pulling on the locking tab.

b)Take out the dust bag.

c)Insert a new dust bag.

d)Push the dust bag fully into the holder.

Please note: the lid will only close if a dust bag has

been inserted.

Cleaning the motor protection filter

The motor protection ﬁlter should be cleaned regularly

by knocking out the dirt and rinsing.

Figure

● Open the dust bag compartment lid.

Figure

a)Release the motor protection ﬁlter from the catch by

pulling it sideways, and pull it out in the direction of

the arrow.

b)Clean the motor protection ﬁlter by tapping out the

dirt.

c)If it is very dirty, the motor protection ﬁlter should be

rinsed.

● The ﬁlter must then be left to dry for at least 24

hours.

d)After cleaning, reﬁt the motor protection ﬁlter into

the appliance, lock it in place and close the dust bag

compartment lid.

Replacing the exhaust filter

Vacuum cleaner with micro-hygiene filter

This should be replaced with every replacement ﬁlter

pack

Figure

● Open the dust bag compartment lid.

Figure

a)Release the ﬁlter holder by moving the locking lever

in the direction of the arrow.

b)Remove the micro-hygiene ﬁlter.

c)The micro-hygiene ﬁlter can be rinsed out.

● The ﬁlter must then be left to dry for at least 24

hours.

d)Remove the micro-hygiene ﬁlter. Insert the new

micro-hygiene ﬁlter into the appliance.

e)Insert the ﬁlter holder into the appliance and lock it

in place.

22*

Vacuum cleaner with HEPA filter

If your vacuum cleaner is equipped with a HEPA ﬁlter,

this must be replaced once a year.

Figure

●

Open the dust bag compartment lid.

Figure

)Unlock the HEPA ﬁlter by moving the locking lever in

the direction of the arrow and remove the ﬁlter from

the appliance.

b)Insert the new HEPA ﬁlter and lock it in place.

After vacuuming ﬁne dust particles, clean the motor

rotection ﬁlter and, if necessary, replace the

microhygiene ﬁlter or HEPA ﬁlter.

Care

Always switch off the vacuum cleaner and disconnect it

from the mains before cleaning the vacuum cleaner. The

vacuum cleaner and plastic accessories can be cleaned

with ordinary plastic cleaner.

Do not use abrasive materials, glass-cleaning agents

or all-purpose cleaning products. Never immerse the

vacuum cleaner in water.

If required, the dust compartment can be vacuumed out

with a second vacuum cleaner or simply with a dry

duster/ dusting brush.

Subject to technical modiﬁcations.

23*

depending on model

GA 9000 849 148_Z 41 11.12.2012 13:45 Seite 73

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens VSZ4GXTRM1 Seite 74

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info