Operating the appliance en
17
Switching on the appliance/
selecting a programme
Press the # button. The appliance is
switched on.
The Î Cottons programme, which is
preset at the factory, is then always
displayed.
You can use this programme or select a
different programme.
Note: If you have activated the
childlock, you must deactivate it before
you can set a programme.
Presettings and maximum load are
indicated on the Touch-Display for the
selected programme:
You can use the displayed presettings
or adjust the selected programme
optimally to the items of washing by
changing the programme default
settings ~ Page 13 and/or selecting
programme additional settings
~ Page 14.
Changing the programme
default settings
You can use the default settings or
change them.
To do this, repeatedly select the
corresponding button until the required
setting is displayed.
The settings are activated without
needing to be confirmed.
They are not saved when the appliance
is switched off.
Programme defaule settings
~ Page 13
Overview of programmes ~
Supplementary sheet for the operating
and installation instructions.
Selecting the programme
additional settings
By selecting additional settings, you can
better adapt the washing process to
your items of laundry.
The settings can be selected or
deselected depending on the
programme progress.
The indicator lamp for the button lights
up if a setting is actived.
The settings are not saved when the
appliance is switched off.
Programme additional settings
~ Page 14
Overview of programmes ~
Supplementary sheet for the operating
and installation instructions.
Placing laundry into the drum
:Warning
Risk of death!
Items of laundry pretreated with
cleaning agents that contain solvents,
e.g. stain remover/cleaning solvent,
may cause an explosion after being
loaded into the appliance.
Hand-rinse these items of laundry
thoroughly beforehand.
Notes
■ Mix items of laundry of varying sizes.
Laundry items of different sizes
distribute themselves better during
the spin cycle. Individual laundry
items may cause an unbalanced
load.
■ Observe the maximum specified
load. Overfilling adversely affects the
washing result and promotes
creasing.
