Bedienungsanleitung Sigma DP2X (Seite 123 von 123) (Englisch)

542968

123

Zoom out

Zoom in

Vorherige Seite

1/123

Nächste Seite

ADDITIONAL INSTRUCTION MANUAL ENGLISH C76_EN

The following function is added to the DP2x camera. This instruction manual explains the

additional function. Please refer to this additional instruction manual along with the DP2x User’s

Manual.

CAPTURE PRIORITY MODE

When the Drive Mode is set to Single, the shutter may not release immediately due to image

processing. However, by setting the Drive Mode to the new “Capture Priority” function, it will

enable the shutter to release continuously until the buffer is full. Therefore, it is possible to shorten

the time between taking photos.

How to set up:

Select from the Drive Mode in Quick Set Menu (P.3 4 ) or [ Capture Settings] (P. 26 ) →

[Drive Mode] → [ Capture Priority].

When the Capture Priority Mode is set, the CP

Timer and number of shots remaining before

the memory buffer is full will be displayed on

the bottom right corner of the LCD monitor. A

CP countdown timer will begin when the first

picture is taken.

CP TIMER

NUMBER OF SHOTS

REMAINING BEFORE

MEMORY BUFFER FULL

While the camera is in Capture Priority Mode, image processing will start once the buffer is full. If

you stop taking pictures before the buffer is full, image processing will start after passing the

predetermined time automatically. This time can be set in the [ Timer setting] menu.

The Timer setting can be set in [ Capture Settings] (P. 2 6 ) →[ Timer setting].

It is possible to select from following.

5 sec., 10 sec.(Default), 30 sec., 60 sec.

By doing the following while the CP Timer is in operation, the CP Timer will be reset and begin the

countdown again from the predetermine time.

Press the shutter button halfway

Press the

Button

Press the Button

Magnify the display while in MF mode

Change to other Exposure Modes

While the CP Timer is in operation, it is possible to start image processing immediately by pressing

the button.

WARNING!!

z When the Drive Mode is set to the Capture Priority Mode, the following functions cannot be used.

Interval timer

Image with Sound

Save My Settings

Load My Settings

Capture a custom white

balance image

z If Auto Bracketing is set, the Drive Mode is set to Single Capture mandatorily.

z While CP Timer is in operation, LCD Sleep and Auto Power Off will not operate.

z While CP Timer is in operation, it is not possible to change the Drive Mode. After finishing the

image processing, please change the Drive Mode.

z While CP Timer is in operation, it is not possible to change to the review mode. Please press the

button once to complete the image processing and then press the button again to switch

to review mode.

z If the battery level is low or the capacity of the card is full, image processing will start automatically

regardless of the CP Timer setting.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sigma DP2X Seite 123

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sigma DP2X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info