Bedienungsanleitung Silvercrest CRB-631 IAN 48989 (Seite 21 von 44) (Englisch)

737534

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Overview of the device - CRB-631

lish

Traffic announcement (TA)

The TA button is used in TUNER mode to switch the "Traffic announcement" function

on and off. The default setting is OFF. Press the TA button to switch the function on

and press it again to switch it off. If the "Traffic announcement" function is active, the

device automatically tunes into a station with traffic announcements (TA appears on the

screen). If the "Traffic announcement" function is switched on but no traffic news is

currently available, the TA symbol flashes on the display. If the device cannot receive a

station with traffic announcements, it returns to the previously set station. If the TA

function is switched on, but no RDS signal is received, the symbol TP flashes on the

display.

If the device is run in another mode when the TA function is active (such as CD, USB,

SD or AUX-IN), the device automatically switches to TUNER mode if a traffic

announcement is received and the traffic announcement is transmitted. After the traffic

announcement the device automatically returns to its previous mode. When a traffic

announcement is being made, the buttons AS/PS, (preset) buttons [1-6] / PTY / MODE

/ Tune up / Tune down and the Band button are locked. When the TA button is

pressed briefly once, the received traffic announcement is ignored. The "Traffic

announcement" function is switched off by pressing the TA button twice.

Programme type (PTY)

The "Programme type" function is switched on and off by pressing the PTY button in

TUNER mode. The default setting is OFF. If the "Programme type" function is switched

on and a corresponding station is received, the PTY information is shown on the

display. If the "Programme type" function is switched on, the last selected PTY

programme can be searched for by pressing the buttons Tune up/Tune down. The

PTY genre of your choice can be selected by pressing and holding the PTY button and

afterwards pressing the plus (+) or minus (-) buttons. If you press the PTY button

again, the device searches for a station which corresponds to this PTY genre. If no

corresponding station is found, the message "NOT FND" (not found) is shown on the

display and the PTY symbol flashes. The PTY search is cancelled by pressing the PTY

button again.

Alternative frequency (re-tuning if the signal is weak) (AF / REG)

The "AF" function is switched on or off by pressing the AF button in TUNER mode. The

default setting is OFF. If the AF function is switched on and available on the selected

station, the AF symbol is shown on the display. If the function is not available, the

symbol flashes.

If the AF button is pressed in TUNER mode for longer than 2 seconds, the

"REGIONAL" function is switched on or off. The default setting is OFF. If the REG

function is switched on, the device searches for the station with the same station ID on

another frequency. If the function is switched off, the station ID is ignored.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest CRB-631 IAN 48989 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest CRB-631 IAN 48989

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info