Bedienungsanleitung Silvercrest DB 1750 C3 - IAN 284939 (Seite 51 von 58) (Deutsch, Englisch, Holländisch, Französisch)

796217

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

6.4 Ironing without steam

Sensitive fabrics are ironed at lower temper-

atures and without steam. In order to damp-

en them, the spray function is available.

1. Set the steam control|3 to and the

temperature control|13 to MIN.

2. Fill the water tank|10 if you wish to use

the spray function.

3. Place the steam iron on the base unit|9.

4. Connect the mains plug|8 with the wall

socket.

5. Set the desired temperature using the

temperature controller|13. The tempera-

ture control lamp|11 lights up.

6. Start ironing as soon as the ironing tem-

perature has been reached and the tem-

perature control lamp|11 goes out.

7. Finish ironing, set the temperature con-

troller|13 to MIN and pull out the

mains plug|8.

8. Allow the steam iron to cool down, and

pour off any remaining water from the

water tank|10 through the filling open-

ing in the water tank (under the lid|2).

6.5 Ironing with steam

Steam ironing requires a high temperature,

at least the temperature setting for . In or-

der to additionally dampen items of cloth-

ing, the spray function is also available.

1. Set the steam control|3 to and the

temperature control|13 to MIN.

2. Fill the water tank|10.

3. Place the steam iron on the base unit|9.

4. Connect the mains plug|8 with the wall

socket.

5. Set the temperature controller|13 to the

desired temperature (at least ). The

temperature control lamp|11 lights up.

6. Once the ironing temperature has been

reached and the temperature control

lamp|11 goes out, set the steam con-

trol|3 to and start ironing.

The steam will ...

… start to come out as soon as you hold

the steam iron horizontal, and

… stop as soon as:

- you hold the steam iron vertically,

- you place the steam iron on the base

unit|9,

- the temperature is too low,

- the water tank|10 is empty

- Set the steam control|3 to .

7. Finish ironing, set the temperature con-

trol|13 to MIN, the steam control|3 to

, and pull out the mains plug|8.

8. Allow the steam iron to cool down, and

pour off any remaining water from the

water tank|10 through the filling open-

ing in the water tank (under the lid|2).

6.6 Steam jet function

The steam jet function requires a high tem-

perature. Select a temperature setting be-

tween and MAX. For this purpose, the

water tank|10 must be at least one quarter

full. The steam control|3 is set to the symbol

• Press the steam jet button|5 while the

steam iron glides over the item of laun-

dry.

• Wait a few seconds before you press

the steam jet button|5 again.

NOTE:

• For smoothing items of clothing that are

hanging up, you can use the steam jet

Button in a vertical position.

BB1$6B%XHJHOHLVHQB%ERRN6HLWH'LHQVWDJ-DQXDU

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest DB 1750 C3 - IAN 284939 Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info