Bedienungsanleitung Silvercrest HS 2700BT (Seite 6 von 9) (Englisch)

566386

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

English

IMPORTANT INFORMATION

Troubleshooting

1. The red LED indicator on the headset flashes.

The headset is low on battery. Charge the headset for 2 hours until the red LED indicator on

the adapter turns off.

2. The headset cannot be turned on after being charged for 20 minutes.

To turn on the headset, you need to charge the battery for 40 minutes or more.

However, it is highly recommended to fully charge the battery before use.

3. No indication of charging is shown.

If the headset battery is empty or the headset hasn't been used for a long time, it may take

several minutes till the LED indicator on the adapter shows the charging status with a solid

red light.

4. No sound connection between headset and other devices.

- Make sure that the two devices have been paired.

- Make sure that the headset is turned on.

- Make sure that the two devices are within range.

- Some Bluetooth mobile phones can support only one Bluetooth headset. Disconnection

may happen when there is more than one headset paired with your mobile phone.

Battery Information

New batteries

- For first time use, plug the adapter into the headset and charge it for at least 4 hours until

the red indicator light turns off.

Battery care

- Only qualified Service Centers are authorized to remove or replace the battery.

- Use the battery at room temperature so it can develop its maximum performance.

- The battery capacity may be reduced if operating in a cold environment.

- When not using the headset for a long time, recharge it anyway every two months.

About Pairing

What is Pairing?

Pairing is a process of associating Bluetooth devices with one other. It will establish a

permanent, secure link between the devices and enable quick access to the services provided

without the need to enter any passkeys.

Bluetooth Passkey

Each Mini Bluetooth headset has the default passkey 1234 for pairing, which is stored in its

internal memory. You are usually required to enter the passkey 1234 in a pairing process with

a Bluetooth mobile phone.

Paired devices remain paired even when:

- One of the devices is not powered on.

- A service connection is interrupted or the service stopped.

- One or both devices are rebooted.

Notes for Nokia Bluetooth phones

1. Set the headset as default authorized.

Please ensure that the headset is permitted by the phone to connect without authorization. To

set it as authorized, go to "Bluetooth" > "Paired devices" > select "BT Headset-F" > press

"Options" > select "Request conn. Authorization” > and select “No”.

2. Volume bar appears abnormally.

Due to the differing designs of mobile phones, some models (such as N6230, N6820) will

check the volume status whenever Bluetooth connection is building up. The volume bar may

appear while using the Bluetooth headset. Please skip it.

3. Losing connection accidentally on N6600.

The connection of the headset may be lost accidentally. Please re-connect it if the headset is

disconnected. To re-connect the headset with the mobile phone, press the S1 button of the

headset and wait for the connecting message.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest HS 2700BT Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info