Bedienungsanleitung Silvercrest IAN 314663 SDA 350 A2 (Seite 30 von 116) (Deutsch, Englisch, Holländisch, Französisch, Polnisch, Schwedisch)

752591

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

28 GB

3. Put the food dehydrator trays|3 and the

top food dehydrator tray|2 on the de-

vice.

4. Mount the lid|1.

8.2 Make settings and start

the food dehydration

process

NOTE: for reference values of the drying

temperature, the drying time and the dehy-

dration test, please refer to chapter "Food ta-

bles" on page 25.

1. Insert the mains plug|4 into a wall sock-

et corresponding to the specifications of

the rating plate. On the display|13 00

flashes and Hr is shown.

2. Using the buttons —|15 and +|16 set

the drying time between 1 and 48

hours (01 Hr to 48 Hr) in 1-hour incre-

ments.

3. Briefly press the button |14 once to

switch to the temperature setting. On the

display 55 flashes and °C is shown.

4. In order to change the unit of the tem-

perature between °C and °F, keep the

button |14 pressed.

5. Using the buttons —|15 and +|16 to

set the drying temperature between

40 °C and 70 °C (or between 100 °F

and 160 °F) in 5°-increments.

Briefly press the button |

once

start the food dehydration process.

The fan|9 starts. On the display|13, the

clock symbol is shown, indicating al-

ternatively the set temperature and the

remaining drying time. The drying time

is shown in hours (Hr), within the last

hour in minutes (Min).

7. Once the time set has elapsed, the de-

vice switches off. The fan|9 stops. On

the display|13 00 is shown steadily.

8. Check the dehydrated food applying

the dehydration test (see “Food tables”

on page 25). If the dehydrated food

has not yet been dried sufficiently, start

the food dehydration process again for

another shorter drying time.

9. Once the time set has elapsed, the de-

vice switches off. The fan|9 stops. For a

brief time, an audio signal will sound

and the display|13 will show 00 contin-

uously.

10.After the completion of the food dehy-

dration process, disconnect the mains

plug|4.

8.3 Changing the setting

during the food

dehydration process

During the dehydration process, you can

change the setting of drying time and drying

temperature at any time.

1. Press the button |14 briefly. The re-

maining time flashes on the display|13.

2. As long as the value on the display|13

flashes (approx. 2 seconds), you are

able to change it by pressing the but-

tons —|15 and +|16 .

NOTE: even if the remaining time has been

shown in minutes during the past hour, the

drying time can only be changed in hourly

increments.

Briefly press the button |

once

switch to the temperature setting. As

long as the value on the display flashes

(approx. 2 seconds), you can change

the temperature setting by pressing the

buttons —|15 and +|16 .

4. After approx. 2 seconds, the values will

be stored and shown steadily.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest IAN 314663 SDA 350 A2 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info