Bedienungsanleitung Silvercrest IAN 316750 KA 6045SCR (Seite 18 von 61) (Deutsch, Englisch, Holländisch, Französisch, Polnisch, Schwedisch)

752633

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

18 GB/IE

Note: consult the manufacturer‘s operating manual

before using the drill.

Before installation, familiarise yourself with all

the instructions and illustrations in this manual,

as well as with the product itself.

Note: if the heating unit 1 is to be mounted on

the wall, the rods 4 and base 10 are not required.

The locating screw 20 must also be removed (see

ﬁg. G).

Note: mount the included wall bracket 14 on a

solid, straight wall.

Note: position the heating unit 1 at a height of

at least 180 cm.

Mark drill holes using the included stencil 18 .

You will ﬁnd this on the last page of these in-

structions.

Now drill the ﬁxing holes. Make sure that you

do not damage any water pipes during instal-

lation.

Insert the appropriate dowels (not included)

into the drilled holes.

Attach the wall bracket 14 complete with the

heating unit 1 to the wall using appropriate

screws (not included). Ensure that there is 50 cm

of free space around the heating unit 1.

Initial use

Connect the product to an earthed power socket.

Set up the heating unit 1 in a place at least

50 cm away from walls and ﬂammable materi-

als (furniture, curtains etc.).

Pull on the cord switch 12 until the desired

heating mode appears in the display 2. The

following table lists the diﬀerent heating settings:

Symbol

on dis-

play 2

Heating

mode Output

0 Oﬀ 0 Watt

1Low 650 Watt

2 Medium 1300 Watt

3 High 2000 Watt

To switch the product oﬀ, pull on the cord

switch 12 until the symbol 0 appears on the

display 2.

Attention! If you are using the product con-

nected to a power supply system with a low

current, such as for example at a campsite, only

use it in heating mode 1. To switch the device oﬀ,

positions 2 and 3 will still have to be selected

ﬁrst, which can overload the power supply system.

Cleaning and care

Before cleaning, unplug the mains plug 11 and

wait until the device has cooled down.

Never use strong or abrasive cleaning agents,

scourers or steel wool. These would damage

the product.

Never clean the product with water and

never submerge it in water or other liquids.

Clean the product with a damp cloth.

Regularly remove dirt and insects from behind

the heater grille, using a vacuum cleaner.

Disposal

The packaging is made entirely of recyclable mate-

rials, which you may dispose of at local recycling

facilities.

Observe the marking of the packaging

materials for waste separation, which

are marked with abbreviations (a) and

numbers (b) with following meaning:

1–7: plastics / 20–22: paper and ﬁbre-

board / 80–98: composite materials.

The product and packaging materials

are recyclable, dispose of it separately

for better waste treatment. The Triman

logo is valid in France only.

Contact your local refuse disposal

authority for more details of how to

dispose of your worn-out product.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest IAN 316750 KA 6045SCR Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info