Bedienungsanleitung Silvercrest IAN 317306 SGWI 180 (Seite 18 von 61) (Deutsch, Englisch, Holländisch, Französisch, Polnisch, Schwedisch)

752546

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

18 GB/IE

Cleaning and care / Disposal / Warranty / ServiceSet-up / Operation / Troubleshooting

Inserting / Replacing Batteries

Note: the batteries must be inserted prior to initial

use. First, remove the insulating strips from the battery

compartment 3.

Note: if the scales do not respond, remove and

reinsert the batteries.

Open the battery compartment cover 3.

Insert the three included batteries (with the cor-

rect polarity) in the battery compartment 3.

Please note the markings inside the battery

compartment 3.

Close the battery compartment cover 3 until

you hear it click into place.

Positioning the scales

Place the scales on a stable, level

surface. A solid ﬂoor covering is re-

quired in order to achieve correct

weight measurements.

Adjusting the unit of weight

The factory default setting for the scales as supplied

is „kg”. If you wish to switch to „lb“ or „st“, press

the UNIT button 4 on the back of the scales as

many times as required.

Operation

Tip: if possible, always weigh yourself at the same

time of day (preferably in the morning) after visiting

the toilet, with an empty stomach and without clothing

to ensure that your results are comparable.

Note: if the location or the batteries are changed,

the scales must be re-calibrated. To re-calibrate, do

the following: step onto the scales quickly. Step oﬀ

the platform 1. The scales will be calibrated auto-

matically. Wait until the scales switch oﬀ automati-

cally. The scales are now calibrated and you can

weigh yourself.

Measurements

Step onto the scales barefoot and be sure to

stand still on the platform 1 with the weight

distributed equally between both legs.

Note: if possible, stand on the same area of

the platform 1 each time and do not move.

Moving during the weighing process can lead

to discrepancies in the results.

The scales will start to measure immediately.

The weight display in the LED display 2 will

blink before showing the result.

Step oﬀ the platform 1. The measurement

value in the LED display 2 will disappear after

about 10 seconds. Until then the weight meas-

urement remains visible.

Turning oﬀ the scales

The scales feature an automatic shut-oﬀ function

and will automatically switch oﬀ after displaying

the results.

Troubleshooting

= Error / Display

= Cause

= Solution

= The LED display 2 reads “Lo“.

= The batteries in the scales are dead.

= Replace the batteries.

= The LED display 2 reads “Err“.

= The maximum load capacity of 180 kg /

396 lb / 28 st has been exceeded.

= Do not exceed 180 kg / 396 lb / 28 st.

= “Err“ or incorrect weight is displayed.

= The surface is not level or stable.

= Place the scales on a level, stable surface.

= You are not standing still.

= Stand as still as possible.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest IAN 317306 SGWI 180 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info