Bedienungsanleitung Silvercrest IAN 321565 SRGL 1200 A1 (Seite 21 von 88) (Deutsch, Englisch, Holländisch, Französisch, Polnisch, Schwedisch)

750544

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

5. How to use

DANGER! Risk of fire!

~Place the device on a dry, level, non-slip

and heat-resistant surface.

~The device must not be operated close

to flammable liquids or materials, or in

a potentially explosive environment.

Keep at a distance of at least 30 cm

from walls.

NOTE: when in operation for the first time,

some smoke and odour may be generated

by the device. This is related to materials

used on the heating elements during assem-

bly, and is not a defect with the product. En-

sure adequate ventilation.

• Remove all packing material.

• Check to ensure that all parts are pres-

ent and undamaged.

•Clean the device prior to its first

use (see “Cleaning” on page 20)!

1. Remove any labels or stickers (but not

the type plate on the underside).

2. Turn the temperature regulator4 to “0”.

This switches the heater off.

3. Insert the mains plug2 into an easily

accessible earthed wall socket whose

voltage matches the voltage stated on

the rating plate.

The red indicator light6 comes on.

4. Turn the temperature regulator4 to

MAX.

The temperature indicator light5 lights

up, and the appliance starts to heat up.

Leave the appliance switched on for

around 10 - 15 minutes.

5. Switch the heater off by turning the tem-

perature regulator4 to “0”.

6. Take out the mains plug2 and allow the

appliance to cool down.

7. Clean the appliance again (see “Clean-

ing” on page 20).

6. Operation

DANGER! Risk of injury

through burning!

~The metal surfaces become very hot dur-

ing operation. Only touch the handles

and control elements of the device dur-

ing operation.

6.1 Preparing the appliance,

switching on and off

1. Select a location that is firm, level and

not flammable. Maintain a distance of

approx. 30 cm from other objects.

2. Turn the temperature regulator4 to “0”.

This switches the heater off.

3. Grease the raclette pans9 lightly on the

inside. Lightly grease the top surface of

the grill plate1.

Note: Use kitchen paper dipped in a little

cooking oil.

4. Place the grill plate1 on the holders of

the base section8. Ensure that the grill

plate1 is correctly positioned on the

holders.

5. Insert the mains plug2 into an easily

accessible earthed wall socket whose

voltage matches the voltage stated on

the rating plate.

The red indicator light6 comes on.

6. Turn the temperature regulator4 clock-

wise to MAX.

The temperature indicator light5 lights

up, and the appliance starts to heat up.

Allow the appliance heat up for around

10 minutes.

The appliance is now ready to use.

7. To turn the heater off, turn the tempera-

ture regulator4 one notch anticlockwise

towards “0”.

__321565_lang_B8.book Seite 19 Donnerstag, 19. September 2019 8:23 08

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest IAN 321565 SRGL 1200 A1 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info