Bedienungsanleitung Silvercrest IAN 322493 SEF3 2000 D3 (Seite 29 von 141) (Deutsch, Englisch, Holländisch, Französisch, Polnisch, Schwedisch)

751860

Zoom out

Zoom in

Vorherige Seite

1/141

Nächste Seite

~The lid should be kept closed during

heating and frying.

~Hot steam escapes from the oil filter dur-

ing frying. Be careful not to put your

hands into the steam.

~Do not touch any hot parts of the de-

vice, e.g. the inspection window, the

openings in the lid, or the metal housing

of the deep fryer. Only touch the frying

baskets by their handles.

~After frying, the deep fryer should cool

down for at least 1 to 2 hours before

you empty the oil container and clean

the device.

DANGER of slipping

~Avoid any splashes of oil/fat on the

floor. There is a danger of slipping!

DANGER! Risk of electric

shock due to moisture

~Protect the device from moisture, water

drops and water splashes.

~Do not use the device in the open air or

near vessels filled with water, e.g. sinks.

~If the device has fallen into water, pull

out the mains plug immediately, and

only then remove the device from the

water. Do not use the device again, and

have it checked by a specialist work-

shop.

DANGER! Risk of electric

shock

~Do not use the device if the device or

the power cable has any visible dam-

age, or if the device has previously

been dropped.

~Extension cables must be designed for a

minimum of 10 ampere.

Lay the power cable and any extension ca-

ble such that nobody can step on them, get

caught on them, or trip over them.

~Before connecting the device, check that

the on/off switch is set to O.

~Connect the mains plug only to a cor-

rectly installed, easily accessible

earthed wall socket with voltage corre-

sponding to the rating plate. The wall

socket must still be easily accessible af-

ter connection.

~Ensure that the power cable cannot be

damaged by sharp edges or hot spots.

Do not wrap the power cable around

the device. Use the cable spool on the

back of the device.

~Even after it has been switched off, the

device is not completely disconnected

from the mains. In order to fully discon-

nect it, pull out the mains plug.

~When setting up the device, make sure

that the power cable is not trapped or

crushed.

~To pull the mains plug out of the wall

socket, always pull on the mains plug,

and never on the power cable.

~Disconnect the mains plug from the wall

socket …

… if there is a fault,

… if the device or the power cable is

damaged;

… when you are not using the device,

… before you clean the device and

… during thunderstorms.

~Do not connect another device with a

high power consumption to a wall sock-

et on the same electrical circuit. This

way you will avoid overloading the

mains power supply.

~Do not connect the device by using a

multiple socket. By doing so the socket

might be overloaded.

~In order to avoid any hazards, do not

make modifications to the device.

__322493_Edelstahl Fritteuse_B8.book Seite 27 Freitag, 28. Juni 2019 9:32 21

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest IAN 322493 SEF3 2000 D3 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info