Bedienungsanleitung Silvercrest IAN 326967 (Seite 27 von 29) (Englisch)

751815

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

GB / IE / NI106

Maintenance

Trouble shooting guide

Problem Cause Correction

Upper thread

breaks 1.The machine is not threaded

correctly. 1.Rethread the machine.

2.The thread tension is too tight. 2.Reduce the thread tension (3). (lower

number)

3.The thread is too thick for the needle. 3.Use a larger needle.

4.The needle is not inserted correctly. 4.Remove and reinsert the needle. (at

side towards the back)

5.The thread has become wound

around the bobbin winder spindle (14). 5.Remove the bobbin (g) and unwind the

thread.

6.The needle is damaged. 6.Replace the needle.

Lower thread

breaks 1.The bobbin case is not inserted

correctly. 1.Remove and reinsert the bobbin case

and pull on the thread. The thread

should pull easily.

2.The bobbin case is threaded wrongly. 2.Check both bobbin (g) and bobbin case.

Skipped stitches 1.The needle is not inserted correctly. 1.Remove and reinsert needle. (at side

towards the back)

2.The needle is damaged. 2.Replace the needle.

3.The wrong size needle has been

used. 3.Choose a needle size to suit the thread

and fabric.

4.The wrong presser foot is installed. 4.Use the correct presser foot.

Needle breaks 1.The needle is damaged. 1.Replace the needle.

2.The needle is not correctly inserted. 2.Insert the needle correctly (at side

towards the back)

3.Fabric too thick/ needle size wrong. 3.Choose a needle size to suit the thread

and fabric.

4.The wrong presser foot is attached. 4.Use the correct presser foot.

Loose stitches 1.The machine is not correctly threaded. 1.Thread the machine correctly.

2.The bobbin case is not correctly

threaded. 2.Thread the bobbin case as illustrated.

3.Needle/ fabric/ thread combination is

wrong. 3.The needle size must suit the fabric and

thread.

4.Thread tension wrong. 4.Correct the thread tension.

Seams gather

or pucker 1.The needle is too thick for the fabric. 1.Use a ner needle.

2.The stitch length is wrongly adjusted. 2.Check the thread tension.

3.Fabric puckers. 3.Use a backing for ne or stretchy

fabrics.

Uneven

stitches,

uneven feed

1.The thread is too weak. 1.Use stronger thread.

2.The bobbin case is wrongly threaded. 2.Rethread the bobbin case and insert

correctly.

3.Fabric has been pulled when sewing. 3.Do not pull on the fabric. It must be

automatically moved by the machine.

The machine is

noisy 1.The machine must be lubricated. 1.Lubricate as described.

2.Fluff or oil have collected on the hook

or needle bar. 2.Clean the hook and feed dog as

described.

3.Poor quality oil has been used. 3.Only use good quality sewing machine

oil.

4.The needle is damaged. 4.Replace the needle.

The machine

jams Thread is caught in the hook. Remove the upper thread and bobbin

case, turn the handwheel (21) backwards

and forwards by hand and remove the

thread remains. Lubricate as described.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest IAN 326967 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest IAN 326967

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info