Bedienungsanleitung Silvercrest IAN 329277 SWKK 2200 B2 (Seite 21 von 82) (Deutsch, Englisch, Holländisch, Französisch, Polnisch, Schwedisch)

751804

Zoom out

Zoom in

Vorherige Seite

1/82

Nächste Seite

or place it on an even surface to be

able to read the water level display3

correctly.

4. Close the lid9, by pressing it down-

wards.

5. Place the kettle on the device base4.

6. Insert the mains plug5 into a readily

accessible earthed wall socket whose

voltage matches the voltage stated on

the rating plate.

7. Press the on/off switch6 down, until it

lights up and locks into place.

8. The device automatically switches off as

soon as the water starts to boil, or when

you remove the kettle2 from the device

base4.

9. Disconnect the mains plug5 from the

wall socket.

10.Remove the kettle2 from the device

base4 and pour the water out.

8. Cleaning

DANGER! Risk of electric

shock!

~Pull the mains plug5 out of the wall

socket before you clean the kettle2.

The kettle

, the device base

, the pow-

er cable and the mains plug

must not

be immersed in water or other liquids.

DANGER! Risk of injury

through scalding!

The kettle

becomes very hot during op-

eration. Allow it to cool down before

cleaning.

WARNING! Risk of material damage!

~Do not use any astringent or abrasive

cleaning agents.

Cleaning the kettle

1. Disconnect the mains plug5 from the

wall socket.

2. Wipe the kettle2, the device base4

and the power cable5 with a damp

cloth if necessary. Dry with a dry cloth.

3. Allow all parts to dry completely before

you put them away or use the device

again.

Cleaning the limescale filter

1. Open the lid9.

2. Press the limescale filter1 down and in-

wards.

3. Pull the limescale filter1 off upwards

from the kettle2.

4. Clean the limescale filter1 with a moist

dishcloth under running water.

5. Place the limescale filter1 into the in-

tended recess in the kettle2 and press it

down and outwards.

6. Release the downward pressure so that

the limescale filter1 will lock in place at

the top in the recess.

Descaling

After some time, the boiling process will re-

sult in limescale being deposited in parts of

the kettle (depending on the hardness of the

water used). You should remove this at regu-

lar intervals, because otherwise the power

consumption of the device will increase.

1. Press the limescale filter1 down and in-

wards.

2. Pull the limescale filter1 off upwards

from the kettle2. If there is limescale

residue in the limescale filter1, place it

in the kettle when descaling.

3. Fill the limescale remover into the

kettle2. Use a commercially available

limescale remover, e.g. limescale re-

mover for coffee machines. Comply

with the instructions on the packaging

of the limescale remover. You can find

the next steps in the instructions of the li-

mescale remover. Rinse the kettle multi-

ple times after descaling, if necessary.

__329277_Wasserkocher_B8.book Seite 19 Donnerstag, 5. September 2019 8:12 08

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest IAN 329277 SWKK 2200 B2 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info