Bedienungsanleitung Silvercrest IAN 329288 HG05616B (Seite 19 von 66) (Deutsch, Englisch, Holländisch, Französisch, Polnisch, Schwedisch)

751720

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

19 GB/IE

Q Weigh and add

The product allows you to weigh foods consecutively

without removing food already in the weighing

bowl 1.

Place the weighing bowl 1 on the product.

Press the ON / OFF button 2 to switch the

product on.

Select the unit of weight by pressing the unit of

weight button (UNIT) / Timer button 5 as

described in “Weighing” section.

Place the food you wish to weigh in the weigh-

ing bowl 1.

The LCD readout 4 indicates the weight of the

food in the selected unit of weight.

Now press the TARE button / Timer button

The numerical display 9 will show zero read-

ing. The TARE symbol 13 will appear.

Now place more food in the weighing bowl 1.

The LCD readout 4 indicates the weight of

the food you have added in the selected unit

of weight.

Continue in this way only until the maximum ca-

pacity of the product is reached or the weighing

bowl 1 is full.

Q Remove part of the

weighed food

Place the weighing bowl 1 on the product.

Press the ON / OFF button 2 to switch the

product on.

Select the unit of weight by pressing the

unit of

weight button (UNIT) / Timer button 5 as

described in “Weighing” section.

Place the food you wish to weigh in the

weighing bowl 1.

The LCD readout 4 indicates the weight of the

food in the selected unit of weight.

Now press the TARE button / Timer button

The numerical display

will show zero readi

ng.

The TARE symbol 13 will appear.

Now remove the required amount of food from

the weighing bowl 1.

The LCD readout 4 will show a negative value

indicated by the minus symbol 12 .

Now press the TARE button / Timer button

The numerical

display

will

show zero reading

The TARE symbol

13 will disappear.

Q Set the countdown timer / alarm

The timer on the product has a time span of 00:10

to 99:50 minutes. The set time is counted down in

reverse to “00:00“. An alarm signal then sounds

and the alarm display 14 ﬂashes.

Press the ON / OFF button 2 to switch the

product on.

Press the Timer button (T-SET) 3. The alarm

display 14 will appear.

Set the required time by pressing the unit of

weight button (UNIT) / Timer button 5 or

the TARE button / Timer button 6.

Press the Timer button (T-SET) 3 again to con-

ﬁrm the set time and to start the countdown timer.

Press the Timer button (T-SET) 3 again to stop

the countdown timer.

Press the Timer button (T-SET) 3 again to reset

the set time to “00:00“. The alarm display 14

will disappear.

Note: When the set time has elapsed, an ala

signal sounds.

Press the ON / OFF button 2 to stop the alarm

and at the same time switch oﬀ the product.

Q Display ambient temperature

When the product is switched on, the LCD readout

4 shows the current ambient temperature. This is

indicated by the temperature display 10 in °C.

Q Switch oﬀ the product

The product switches itself oﬀ automatically after

90 seconds of inactivity to save energy.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest IAN 329288 HG05616B Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info