Bedienungsanleitung Silvercrest IAN 331472 VE 6035SCR (Seite 20 von 74) (Deutsch, Englisch, Holländisch, Französisch, Polnisch, Schwedisch)

750511

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

20 GB/IE

Risk of damage of the product

Only use the speciﬁed type of

battery / rechargeable battery!

Insert batteries / rechargeable

batteries according to polarity

marks (+) and (-) on the battery /

rechargeable battery and the

product.

lean the contacts on the battery /

rechargeable battery and in the

battery compartment before in-

serting!

Remove exhausted batteries /

rechargeable batteries from the

product immediately.

Installation

Note: A cross-head screwdriver is required to

assemble the product.

Remove the product and the accessories from

the packaging.

Assemble the base parts 16 in the shape of a

cross.

Screw the pole 13 to the base parts 16 using

the mounting plate 15 . Use the four cross-head

screws 17 to do this.

Remove the height adjustment ring 12 by rotating

it anticlockwise.

Push the cap 14 over the pole 13 . Then place the

height adjustment ring 12 back on the pole 13 .

Pull the internal pole 11 out of the pole 13 .

Secure the internal pole 11 by turning the height

adjustment ring 12 clockwise to tighten it.

Remove the fastening screw 10 by turning it

anticlockwise.

Push the motor 9 onto the internal pole 11

and attach it using the fastening screw 10 .

Turn it clockwise to tighten.

Remove the rear grille locknut 5. To do this,

turn it anticlockwise.

Place the rear grille 6 on the motor 9 as

shown in Fig. D. Please ensure that the handle

on the rear grille 6 is located at the top.

Attach the rear grille 6 using the rear grille

locknut 5. Turn it clockwise to tighten.

Remove the protective cover from the axle 7.

Push the blades 4 onto the axle 7. Ensure that

the smooth side of the axle 7 is facing down.

Place the blade cover 3 onto the axle 7

and turn it anticlockwise to tighten it.

Hang the front grille 1 on the rear grille 6

using the hook 2. Connect both grilles 1 6

using the provided screw 19 and nut.

Then close the fastening clamps.

Before ﬁrst use

Place the product on a ﬂat and stable surface

and ensure that there is a minimum of 10 cm of

clear space around the product. This product is

not suitable for connection or use in a cupboard

or outdoors.

Connect the mains cable to the socket.

Note: Before connecting the product, ensure

that the main voltage speciﬁed on the product

matches the local line voltage (Voltage:

220–240 V ∼).

Inserting / changing the battery

Open the battery compartment on the back of

the remote control.

Insert the batteries or replace the old batteries

with new ones. Only use batteries of the speci-

ﬁed type („Technical data“).

Note: When inserting the batteries, please

observe the correct polarity. This is indicated in

the battery compartment.

Close the battery compartment.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest IAN 331472 VE 6035SCR Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info