Bedienungsanleitung Silvercrest IAN 331902 SBKL 40 B2 (Seite 22 von 83) (Deutsch, Englisch, Holländisch, Französisch, Polnisch, Schwedisch)

750435

Zoom out

Zoom in

Vorherige Seite

1/83

Nächste Seite

22 GB/IE

Battery capacity indicator:

LED indicator

status Battery capacity

Solid green color 51 % to 100 %

Solid amber color 26 % to 50 %

Solid red color less than 25 %

Flashing red color Battery is charging.

Using the headphones

Connect the headphones with a communi-

cation device.

Place the headphones near a switched on

communication device (e.g. mobile or

computer).

Pairing with a new Bluetooth® device: Hold

the On / Oﬀ button

for approx. 2 seconds

until the LED 7 ﬂashes white. This indicates

the headphones are now ready to connect

mode, which remains active for 5 minutes.

The headphones will switch oﬀ if they do not

detect a Bluetooth® device to connect to.

Now connect your communication device

(mobile phone or computer) via Bluetooth®

with the headphones. Please refer to the

notes in the instructions for your communica-

tion device. Select the entry “SBKL 40 B2“

from the list of devices detected by your

computer or mobile.

Once the connection has been established,

the LED 7 will ﬂash white for 5 seconds.

After that the LED 7 will turn OFF.

Please note, your communication device

must support Bluetooth® Standard 5.0 to

use all options.

You may need to approve the connection on

the communication device. Please refer to the

instructions for use of the communication

device on this topic!

The headphones may be manually switched

oﬀ by holding the On / Oﬀ button 13 for

4 seconds until the LEDs 6 and 7 go.

Bluetooth® indicator:

LED indicator

status Headphone state

Flashing white Pairing mode

Solid white

(5 seconds) and

then turn OFF

Paired

Connecting the headphones

to a second Bluetooth® device

The headphones may be connected to two

Bluetooth® communication devices at the same

time. If the headphones are already connected

to a device, follow the steps below to connect

to the second device:

Activate multipoint mode by pressing and

holding Bluetooth® button 8 for 2 seconds.

The ﬁrst communication device (mobile phone

or computer) is disconnected.

Now connect to the second communication

device via Bluetooth® with the headphones.

Please refer to the notes in the instructions

for your communication device. Select the

entry “SBKL 40 B2“ from the list of devices

detected by your computer or mobile. The

second communication device is connected.

Select the entry “SBKL 40 B2” from the list

of devices detected by your ﬁrst communi-

cation device / computer. Now, both com-

munication devices are connected to the

headphones simultaneously.

After connected the headphone with 2

Bluetooth® devices, you can playback

music via either one of device.

Connection via NFC

You can simply connect the headphones with

your mobile device by tapping 2 devices

together via NFC touchpoint 9.

Please follow below steps to complete the

Bluetooth

connection via NFC touchpoint

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest IAN 331902 SBKL 40 B2 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info