Bedienungsanleitung Silvercrest IAN 338924 SKMC 1200 C3 (Seite 20 von 40) (Englisch)

750504

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

20 GB

11.7 Setting the speed

Turn this display dial to set the speed:

- The speed can be adjusted in 10 increments:

- Speed 1 - 4: for the mixer attachment21;

- Speed 1 - 10: for the blade assembly19.

- There are 2 time ranges for the speed:

- Speed 1 - 6: for these speeds a time between 1 sec-

ond and 99 minutes can be chosen.

- Speed 7 - 10: for these speeds a time between

1 second and 15 minutes can be chosen.

CAUTION:

~The mixer attachment21 must only be used with

speed settings 1 to 4. On the touchscreen8, a respec-

tive indication appears.

~When mixing liquids at speed 10, the blender jug5

must not contain more than 2.5 litre, otherwise liquid

might be ejected (see “Steaming” on page 26). For

speed settings of less than 10, the blender jug5 may

only be filled up to a maximum of 3 litres.

- For further notes: see “Overview of functions” on

page 12.

- The speed setting is shown on the touchscreen8.

- During operation, the speed setting can be changed.

- The speed cannot be set for the steaming function.

- If during operation you change the speed to 0, the de-

vice will stop. To continue working, select a speed and

press the button X35.

- If a temperature has been selected, only the speed set-

tings 1 - 3 are available.

Soft start

In order to avoid that during sudden acceleration of hot

food liquid is ejected from the blender jug5 or the device

starts wobbling, an automatic soft start is provided for all

settings except for the turbo function:

- Soft start activates with food temperatures exceeding

60 °C.

11.8 Anti-clockwise rotation

The anti-clockwise rotation is used for gentle stirring of

food not to be chopped.

- By pressing button 36 the direction of rotation of

the blade assembly19 can be changed in standard

operation at any time.

- The anti-clockwise rotation can only be applied at low

speed settings 1 to 3.

- For programs KNEADING and ROASTING, the anti-

clockwise rotation is controlled by the program.

•36 Press to activate the anti-

clockwise rotation. The symbol ap-

pears at the bottom of the display

dial for as long as the function is ac-

tivated.

•36 Press to deactivate the anti-

clockwise rotation.

11.9 Turbo function

CAUTION:

~When mixing liquids, the blender jug5 must not con-

tain more than 2.5 litre, otherwise liquid might be

ejected.

~Never use this function when the mixer attachment21

is used.

With the turbo function you can briefly select speed setting

10 (maximum). This, for example, is used to quickly chop

nuts, small amounts of herbs or onions.

-38 is present: the function is possible.

-38 is greyed out: the button is blocked, the function

is disabled (e.g. because the food temperature inside

the blender jug exceeds 60 °C).

• Press and keep button Turbo38 pressed for as long

as you need the function. To repeat, release the button

and press again.

00:00 0 °C

00:5100

°C

Anti-clockwise

00:04

Turbo 0 °C

Turbo Anti-clockwise Weighing

__338924_1907_MC-Connect_GB_online.book Seite 20 Donnerstag, 12. Dezember 2019 10:09 10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest IAN 338924 SKMC 1200 C3 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest IAN 338924 SKMC 1200 C3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info