Bedienungsanleitung Silvercrest IAN 338924 SKMC 1200 C3 (Seite 26 von 40) (Englisch)

750504

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

26 GB

13. Steaming

DANGER! Risk of injury through scalding!

~When opening the lid1 or24 during operation, hot

steam may escape.

NOTE: these user instructions describe the basic functions

such as mixing, chopping and steaming.

13.1 General program information

- Preset time: 20 minutes (adjustable),

maximum time: 60 minutes

- Preset temperature: 120 °C (fixed)

-Speed: off, not selectable

-heating up is displayed in the middle display dial.

- You can skip the heating time.

- Steaming has begun:

-heating up has gone out.

- The lower time display will show 20 minutes or your

chosen time.

13.2 Preparation of the steamer

attachments

1. Place the blender jug5 into the holder11.

2. Fill 1 litre of water into the blender jug5. This corre-

sponds with the second marking from the bottom (I).

3. Check that the seal4 for the deep steamer attach-

ment3 has been placed correctly.

4. Place the deep steamer attachment3 slightly twisted

onto the blender jug5.

5. Turn the deep steamer attachment3 so that it clicks

into place and an acoustic signal is heard.

The program can only be started if the steamer at-

tachment3 is set correctly.

NOTE: in order to facilitate the attaching of the steamer

attachment3 somewhat, put a few drops of oil on a cloth

and rub it on the seal4.

6. Put the food into the steamer attachment3 and (if

necessary)2.

NOTES:

• Even if you only need the shallow steamer attach-

ment2, always both steamer attachments3 and2

must be inserted, so that no steam can escape to the

side.

• Notes on the seal4: (see “Deep steamer attach-

ment3” on page 35).

7. Place the filled steamer attachment2 onto the steam-

er attachment3.

8. Close the steamer attachments using the lid for the

steamer attachments1.

13.3 Starting the steaming process

1. The device is switched on and shows the start menu.

2. Press the button to enter the automatic programs

menu and then the STEAMING43 and ---> buttons.

The values for the program appear in the three dis-

play dials.

NOTE: you can change the values for the time. Tap the

time display dial and adjust directly with the display dial

or the control dial.

3. Press the X35 button. The heating time will start.

During this time

-heating up appears in the middle display dial.

-Press skip if you want to skip the heating time.

4. After the heating time has elapsed, the program

starts.

-heating up is extinguished and the speed setting 0

appears.

The lower time display shows 20 minutes or the se-

lected time.

Auto Recipes Settings

20:00 0 120

°C

Turbo Anti-clockwise Weighing

STEAMING

GB_MC Connect_Kuechenmaschine_MC.fm Seite 26 Donnerstag, 19. März 2020 3:11 15

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest IAN 338924 SKMC 1200 C3 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest IAN 338924 SKMC 1200 C3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info