Bedienungsanleitung Silvercrest IAN 338924 SKMC 1200 C3 (Seite 37 von 40) (Englisch)

750504

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

19. Malfunctions, Cause, Remedy

If your device fails to function as required, please try this checklist first. Perhaps there is only a minor problem, and you

can solve it yourself.

DANGER! Risk of electric shock!

~Do not attempt to repair the device yourself under any circumstances.

Malfunction Cause Remedy

Device does not start.

Blender jug5 is not positioned correctly. Insert blender jug5 correctly (see “Insert

blender jug” on page 15).

Lid24 or deep steamer attachment3

have not been placed correctly onto the

blender jug5.

Place lid24 or deep steamer attach-

ment3 correctly.

No power supply. Check mains plug16, on/off switch7

and possibly the fuse.

Liquid underneath the device

The blade assembly19 has not been in-

serted correctly so that the blender jug5 is

leaking.

Insert blade assembly19 correctly (see

“Using and removing the blade assembly”

on page 15).

Seal18 for blade assembly is defective. Insert (see “Cleaning, checking and re-

placing seals” on page 34) new seal18.

Liquid escaped from the blender jug5

flowing onto the work surface through the

overflow hole13 of the base unit14 (see

“Overflow hole” on page 21).

When mixing liquids at speed 10 or with

button Turbo38, the blender jug5 must

not contain more than 2.5 litre, since oth-

erwise liquid might be ejected. For speed

settings of less than 10, the blender jug5

may only be filled up to a maximum of

3 litres.

Liquid escapes at the lid24

of the blender jug5.

Seal23 has not been inserted correctly.

Insert seal23 correctly (see “Cleaning,

checking and replacing seals” on

page 34).

Seal23 is defective. Insert (see “Cleaning, checking and re-

placing seals” on page 34) new seal23.

No temperature can be set. A speed setting 4 - 10 was selected. Select speed setting 0 - 3 (see “Setting the

speed” on page 20).

Blade assembly19 not turn-

ing.

Is the blade socket12 worn out? This can

happen, for example, if you have pro-

cessed too large a quantity of dough.

Replace the blade socket12 with a new

one (see “Replacing the blade socket” on

page 36) and comply with the specified

maximum quantities in future.

Parts of the device are dis-

coloured.

Certain foods or spices (e.g. curry) may

discolour the plastic. This is not a device

error.

Remedy unnecessary, since not harmful to

health.

A speed setting exceeding 3

cannot be selected. A temperature has been set. Set temperature to 0.

Error messages or notes in

the screen. Warning against incorrect operation. Follow the instructions on the screen.

__338924_1907_MC-Connect_GB_online.book Seite 37 Donnerstag, 12. Dezember 2019 10:09 10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest IAN 338924 SKMC 1200 C3 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest IAN 338924 SKMC 1200 C3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info