Bedienungsanleitung Silvercrest IAN 356366 SKKM 200 A1 (Seite 20 von 80) (Deutsch, Englisch, Holländisch, Französisch, Polnisch, Schwedisch)

750320

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

GB│IE │ 17 ■

SKKM 200 A1

Starting up the appliance

NOTE

► During initial start-up, you may notice a small

amount of smoke and a slight odour coming

from the appliance. This is due to production

residue. This is normal and is completely

harmless. Ensure that suﬃcient ventilation is

provided by opening a window, for example.

1) Clean the appliance before initial use as

described in the section “Cleaning”.

2) Place the appliance on a level surface.

3) Unwind the cable from around the cable retainer

8 and guide it through the recess at the edge of

the housing.

4) Place the silicone ring 3 on the upper part of

the grinding mechanism 4 in such a way that

the silicone ring 3 is lying ﬂat on the upper

part of the grinding mechanism 4 and is ﬂush

with it.

5) Insert the upper part of the grinding

mechanism4 into the lower part5. The dot ●

on the upper part of the grinding mechanism 4

must be aligned with the line on the housing,

so that the two catches at the side slide into the

corresponding recesses.

6) Place the coﬀee bean container 2 into the

housing so that the ▼ arrow on the coﬀee bean

container 2 is pointing to the symbol on

the appliance housing. Turn the coﬀee bean

container 2 a little way clockwise to lock it

into position.

NOTE

► The appliance can not be operated unless the

coﬀee bean container 2 has been correctly

inserted.

7) Insert the power plug into a mains wall socket.

8) When you use the appliance for the ﬁrst time,

proceed as follows to remove any production

residue:

–Open the rubber closure in the lid e of the

coﬀee powder container r and push this into

the appliance beneath the output opening 7 so

that it is located securely in the round recess.

–Add 3 tablespoons of coﬀee beans into the

coﬀee bean container 2 and replace the

lid 1.

–Turn the coﬀee bean container 2 clockwise

until the ▼ arrow on the coﬀee bean container

2 is above the 15 on the scale for adjusting

the grind setting 6.

–Turn the dial 9 to position 2 and press the

start/stop button 0 to start the grinding

process.

The grinding process stops automatically as

soon as the set quantity of coﬀee powder is

reached.

NOTE

► Before removing the coﬀee powder container

r, tap gently on the housing in front of the

output opening 7 so that any loose coﬀee

powder residue falls into the coﬀee powder

container r.

–Remove the coﬀee powder container r and

dispose of the ground coﬀee.

9) Add a maximum of approx. 250 g of coﬀee

beans into the coﬀee bean container 2, and

the lid 1 should still close. If necessary, carefully

shake the appliance so that the coﬀee beans

are evenly distributed in the coﬀee bean

container 2.

The appliance is now ready for use.

IB_356366_SKKM200A1_LB8.indb 17 26.11.2020 12:04:05

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest IAN 356366 SKKM 200 A1 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info