Bedienungsanleitung Silvercrest IAN321395 SBL 3 A2 (Seite 2 von 2) (Englisch)

751849

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Connecting two loudspeakers

NOTES:

• Playback via cable is always only possible with one loudspeaker.

• The distance between the loudspeakers should not be more than 10 m.

• If you are using two loudspeakers of type SBL3A2

together with your

smartphone, these can play the sound as a pair of stereo loudspeakers (True

Wireless Stereo TWS).

• If the audio device has previously been connected with a

loudspeaker of type SBL3A2, please delete that connec-

tion from the list of Bluetooth connections.

1. Switch on both loudspeakers using the buttons 6. An audio signal

sounds and the LEDs11 flash white.

If one loudspeaker is still connected to an audio device (LED11 flashes

slowly white), briefly press the pairing button 10 on this loudspeak-

er. An audio signal sounds

and the LED

11

flashes white.

2. Hold down the pairing button 10 on one loudspeaker until an audio

signal sounds

. The two loudspeakers are now being paired with one an-

other.

3. After a brief time, the LED

on one of the loudspeakers flashes white,

while on the other the LED flashes slowly white. These two paired loud-

speakers can be connected to an audio device.

4. Switch on the audio device (e.g. smartphone) and start the Bluetooth

connection. The audio device should now receive the device identifica-

tion “SBL3A2”.

5. Establish a connection to the loudspeakers on the audio device. If you

are asked for a password, enter “0000”. All three devices are now in-

terconnected. The list of Bluetooth connections on the audio device dis-

plays the identification “SBL3A2”. An audio signal sounds. The

loudspeaker with the flashing LED11 plays the right audio channel,

and the loudspeaker with the lit LED plays the left audio channel.

6. Now, start the playback of a music track on the audio device. The

sound is played back via the loudspeakers.

NOTES:

• Hold down the button 6 on one of the two paired loudspeakers to

switch off both devices simultaneously.

• To unpair two paired loudspeakers, hold down the pairing button

10 on the loudspeaker with the slowly flashing white LED11 until

an audio signal sounds.

Disconnecting Bluetooth connection and searching for

a new device

If you want to connect another device to the loudspeaker via Bluetooth, pro-

ceed as follows:

1. The loudspeaker is switched on and Bluetooth is activated.

2. Press the button 

briefly. An audio signal sounds and the operating

mode LED

flashes. The identification of the loudspeaker is sent.

3. Proceed as described under “Establishing a Bluetooth connection”.

Disconnecting a Bluetooth connection

In order to disconnect the Bluetooth connection, select one of the following

options:

• Press the button 6 until the loudspeaker is switched off.

• Press the button 10 briefly. An audio signal sounds and the operat-

ing mode LED11 flashes.

• Plug a jack into the jack socket4 on the loudspeaker. The operating

mode LED11 is lit green.

• The connection is also disconnected if the connected devices are set up

too far apart from each other or obstacles interfere with the radio link.

Playback using a cable (Aux in)

NOTE: playback via a cable has priority over the Bluetooth connection. Any

Bluetooth connection set up will be interrupted.

1. Plug the jack of the 3.5 mm stereo jack cable2 into the headphone

socket of the sound source (e.g. MP3 player, telephone) and the jack

socket4 on the loudspeaker.

2. Switch on the sound source.

3. Switch the loudspeaker on using the button 6. The LED11 is lit

green.

4. Start playback from the sound source. The sound is played back via the

loudspeaker5.

5. Set the volume on the sound source to the maximum level and adjust the

volume on the device using the buttons 9/7. The music track can

only be chosen via the sound source.

• Mute the device by pressing the button 8.

Cleaning / storing if not in use

NOTES:

• Disconnect all cable connections.

• Switch off the device using the button 6.

• Clean the device with a slightly damp cloth. Solvents, spirits, thinners

etc. must not be used, as they can damage the surface of the device.

• When not using the device, store it in a place where neither high tem-

peratures nor moisture can affect it.

• Charge the battery before storing the device away for a prolonged pe-

riod. Please note that if the device is stored for too long, this may re-

duce the battery capacity. Avoid a deep discharge of the battery.

Disposal

The battery integrated into this device must not be treated as household

waste. The device with the installed battery must be disposed of properly.

This product is subject to the provisions of European Direc-

tive 2012/19/EC. The symbol showing a wheelie bin

crossed through indicates that the product requires sepa-

rate refuse collection in the European Union. This applies to

the product and all accessories marked with this symbol.

Products marked as such may not be discarded with normal

domestic waste, but must be taken to a collection point for

recycling electrical and electronic devices. This disposal is free of charge.

This recycling symbol marks e.g. an object or parts of the

material as valuable for recycling. Protect the environment

and dispose of the product properly. Further information can

be obtained from your local disposal service or city/munic-

ipal administration.

Packaging

The packaging is made from recyclable materials. Dispose of the packaging

sorted by materials. When disposing of the packaging, make sure you comply

with the environmental regulations applicable in your country.

Trouble-shooting

If your Bluetooth loudspeaker fails to function as required, please try this

checklist first. Perhaps there is only a minor problem, and you can solve it

yourself.

CAUTION!

~Do not attempt to repair the device yourself under any circumstances.

Technical specifications

Subject to technical modification.

Notes on the EU declaration of conformity

HOYER Handel GmbH hereby declares that this product meets the basic re-

quirements of the RED 2014/53/EU and the ROHS Directive 2011/65/EU.

A complete declaration of conformity can be found on the Internet at:

http://qr.hoyerhandel.com/d/321395

Fault Possible causes / Action

No function • Is the battery empty?

• Has the device switched off automatically?

No Bluetooth con-

nection

• Is the Bluetooth function of the audio device acti-

vated?

• Did you switch off the device?

• Is there a plug in the jack socket4 ?

Music cannot be

played via Blue-

tooth

• Is the volume set too low?

• Is a jack plugged into the jack socket4 on the

Bluetooth loudspeaker?

Model: SBL3A2

Power rating: 1x 3 W RMS

Bluetooth:

Frequency range:

Transmitting power:

Range:

Bluetooth v5 (A2DP v1.2, AVRCP v1.0)

2,402 - 2,480 MHz

5 dBm (max.)

up to 10 m

Sockets: 1 x Micro USB

1 x 3.5 mm stereo jack

Battery:

Charging time:

Playback time:

1x 3.7 V

lithium polymer, 1050 mAh (3.89 Wh)

approx. 2 - 2.5 hours

approx. 19 hours

USB port: Input voltage: 5 V

Input current: 1 A

Dimensions (dia. x H):

approx. 65 x 67 mm

Weight: approx. 165 g

Ambient conditions: 10 °C to 40 °C

Relative humidity 40 to 85 %

Symbols used Warranty of the HOYERHandelGmbH

Dear Customer,

your device is provided with a 3 year warranty starting with the purchase

date. In the event of product defects, you are entitled to statutory rights

against the vendor. These statutory rights are not restricted by our warranty

presented in the following.

Warranty conditions

The warranty period starts with the purchase date. Please keep the original

purchase receipt in a safe place. This document is required to verify the pur-

chase.

If within three years from the purchase date of this product a material or fac-

tory defect occurs, the product will be repaired or replaced by us – at our

discretion – free of charge to you, or the purchase price will be refunded.

This warranty implies that within the period of three years the defective de-

vice and the purchase receipt are presented, including a brief written de-

scription of the defect and the time it occurred.

If the defect is covered by our warranty, the repaired or a new product will

be returned to you. No new warranty period starts with a repair or replace-

ment of the product.

Warranty period and statutory claims for defects

The warranty period is not extended when the warranty has been claimed.

This also applies to replaced and repaired parts. Any damages and defects

already existing at the time of purchase must be reported immediately upon

unpacking. Repairs arising after the expiration of the warranty period are

subject to a charge.

Warranty coverage

The device was produced carefully according to strict quality guidelines and

tested diligently prior to delivery.

The warranty applies to material or factory defects.

Excluded from the warranty are wear parts subject to normal

wear and damages to fragile parts, e.g. switches, batteries,

lamps or other parts manufactured from glass.

This warranty expires if the product is damaged, not used as intended or not

serviced. For the proper operation of the product, all instructions listed in the

operating instructions must be observed carefully. Any form of use and han-

dling that is advised against in the operating instructions or warned against

must always be avoided.

The product is only intended for private and not for commercial use. In the

case of incorrect and improper treatment, use of force and interventions not

performed by our authorised Service Centre, the warranty shall cease.

Handling in case of a warranty claim

In order to ensure prompt processing of your matter, please observe the fol-

lowing notes:

• Please keep the article number IAN: 321395_1901 and the pur-

chase receipt as a purchase verification for all inquiries.

• The article number can be found on the rating plate, an engraving, the

title page of your instructions (in the bottom left), or as a label on the

rear or underside of the device.

• If faulty operation or other defects occur, first contact the Service Centre

listed in the following by telephone or email.

• Then, you are able to send a product reported as defective free of

charge to the service address specified to you, including the purchase

receipt and the information on the defect and when it occurred.

At www.lidl-service.com you can download

this and many other manuals, product vide-

os and installation software.

This QR code takes you directly to the Lidl

Service website (www.lidl-service.com),

where you can enter the article number

(IAN)321395_1901 to open your user

instructions.

Service Centre

Service Great Britain

Tel.: 0800 404 7657

E-Mail: hoyer@lidl.co.uk

Service Ireland

Tel.: 1890 930 034

(0,08 EUR/Min., (peak)) (0,06 EUR/Min., (off peak))

E-Mail: hoyer@lidl.ie

Service Cyprus

Tel.: 8009 4409

E-Mail: hoyer@lidl.com.cy

IAN: 321395_1901

Supplier

Please note that the following address is no service address. First contact

the aforementioned Service Centre.

HOYER Handel GmbH

Tasköprüstraße 3

22761 Hamburg

GERMANY

With the CE marking, HOYER Handel GmbH declares con-

formity with EU guidelines.

This symbol reminds you to dispose of the packaging in an en-

vironmentally friendly manner.

Recyclable materials: cardboard (except corrugated card-

board)

Direct current

With the Serbian marking, HOYER Handel GmbH declares

conformity with the Serbian requirements.

zzxxyy

__321395_komplett.book Seite 3 Mittwoch, 22. Mai 2019 9:11 09

Silvercrest IAN321395 SBL 3 A2 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest IAN321395 SBL 3 A2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info