566345
7
Zoom out
Zoom in
Vorherige Seite
1/52
Nächste Seite
Stereo loudspeakers English
5
f
Headphone socket for 3.5
mm jack plug
2. Insert the jack plug of the headphones
into the headphone socket f.
Excessively high volume levels
can damage your hearing. For this rea-
son take care when using headphones.
3. Before using the headphones switch the
loudspeakers on again and carefully in-
crease the volume.
As soon as you connect headphones, the loudspeakers are muted.
The headphone output is of passive design, which means that the volume
can be controlled by means of the control knob c, but the maximum
volume is set on the computer or the audio device. Please note that
headphones can only be connected when the audio device output com-
plies with the limits specified in applicable standards. Please refer to the
corresponding instruction manuals for details.
Troubleshooting
Fault Possible cause, remedy
Loudspeaker LEDs
do not light up.
Control knob c set to "OFF": Turn the control
knob clockwise.
No USB connection: Check the USB connec-
tion. If you have connected the loudspeakers to
a USB hub, connect the loudspeakers directly
to the USB socket of your audio device.
The USB socket of your audio device is defec-
tive.
No sound, but the
LEDs of the loud-
speakers light up.
Volume setting too low: Turn the control knob
c clockwise.
Headphones are connected to the headphone
socket f: Disconnect the headphones.
No audio signal connection: Check the audio
signal connection.
The audio signal output of your audio device is
not functional: Check the function by connect-
ing headphones or another loudspeaker to the
output; read the instruction manual of the audio
device.
No sound or insuffi-
cient volume only
on the connected
headphones.
Volume setting on the audio device too low:
Increase the volume setting on the audio de-
vice
Headphones defective: Check their function by
connecting them directly to the audio device.
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Silvercrest IUSP-210 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Silvercrest IUSP-210

Silvercrest IUSP-210 Bedienungsanleitung - Deutsch, Holländisch, Französisch, Italienisch - 36 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info