Bedienungsanleitung Silvercrest KH2380 (Seite 14 von 30) (Englisch)

118060

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

14 GB/IE

cinch plug jack [red / rear right] fs.

• Insert the white plug of the cinch connection

cable as far as it will go into the LINE IN L cinch

plug jack [white

/ rear left]

ft.

• Then insert the 3.5 mm stereo jack into the

headphone output of the audio device.

•

In order to play back the sound, press the

•

LD / MD

button buuntil the letters AUX

appear in the display window.

•

For operation of the external device, please see

its operating instructions.

Connecting to the aerial

of the motor vehicle

• Guide the connection cable of the vehicle aerial

carefully out of the front of the DIN assembly

bracket up to the car radio.

•

Insert the plug of the connection cable of the

vehicle aerial as far as it will go into the aerial

socket

goof the car radio.

If necessary, use an aerial adapter in accordance

with the technical data of the aerial.

•

If present: Connect the 12 V DC connection cable

of an electric aerial to the electric aerial

plug-in.

Attaching to the DIN assembly

bracket

• Insert the rear of the car radio together with

the connected cables carefully into the DIN

assembly bracket.

•

Ensure that no objects are able to cover the

vents of the metal housing

dt.

• Ensure that there is no connection cable

between the metal housing

dt and the DIN

assembly bracket. Prevent the cables from

becoming caught, as any damage may result in

a short circuit and malfunctioning of the device

or the vehicle’s electronic system.

•

Push the car radio into the DIN assembly bracket

until it distinctly locks into place.

•

You should also secure your device against

theft. Fix the attachment screw

frwith the

anchoring plate and the attachment material to

the engine ﬁre wall of the vehicle.

• Ensure that all cables are properly connected

and that the power supply is working correctly.

The LED (red)

/ power supply

dqﬂashes.

• Use the tip of a ballpoint pen to press the reset

button

dron the front of the device (see Fig. C).

L

Attaching the control panel

• Remove the control panel 1from the plastic

box.

•

Avoid hard contact with the display window

• Place the rear left-hand edge of the control

panel

1on the control panel attachment point

dpon the front of the device.

• Ensure that the plug-in connection strip

cris

positioned in front of the connection socket

dl.

• Carefully press the rear right-hand edge of the

control panel

1against the control panel

attachment point

dpuntil it distinctly locks into

place.

•

Fold the control panel

1upwards and allow it

to lock into place.

L Operation

L Switching on

• Press the

PWR / DIM

button cn.

The factory settings of the device are as follows:

•

The word [WELCOME] appears in the display

window

• The buttons are illuminated in blue (these can

be adjusted on two levels).

Installation / Operation

KH2380_Content_UK.indd 14 12.09.2006 11:57:12 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest KH2380 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest KH2380

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info