Bedienungsanleitung Silvercrest KH6517 (Seite 7 von 29) (Englisch)

118120

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

- 7 -

8.1 Connecting to a television via ScartCable/RGB

Note:

Connecting the DVD player to a television with a Scart cable via the RGB

input offers a high quality connection. Select this connection variation in

the case of televisions equipped with an RGB input. If you are not sure if

the television is equipped with an RGB input then you can check this by

consulting the television's instruction manual.

• Connect the jack inscribed with

EURO SCARTto a television Scart socket by

using the supplied Scart cable.

• For playback select the matching channel on your television Check with

the television's instruction manual on how you can set the AV channel.

• In the OSD menu select the menu Video/Video output/RGB.

On this topic see also chapter 10.3 "Video settings: Video output.

8.2 Connecting to a television via S-Video

Note:

For this type of connection the television must have available an S VIdeo

input and two audio "IN" cinch sockets. If you are not sure if the television

is equipped with S Video and/or cinch sockets you can check this by

consulting the television's instruction manual.

For this connection variant you will need:

• an audio cinch cable (not supplied)

• an S-video cable (not supplied) These can be obtained from your dealer.

To connect the DVD player to a television via S-video:

• Connect the jack inscribed with

S-VIDEOto a television S-video socket

using an S-video cable.

• Connect the audio output sockets

L/R on the rear panel of the DVD player

to the corresponding audio inputs on the television with an audio cinch

cable.

Make sure that the red and white colour markings correspond.

• For playback select the matching channel on your television Check with

the television's instruction manual on how you can set the AV channel.

• In the OSD menu select the menu Video/Video output/RGB.

On this topic see also chapter 10.3 "Video settings: Video output.

8.3 Connection to a television via video input (Composite

Video)

For this connection variant the television must be equipped with Audio/Video

cinch sockets (Composite Video).

In order to connect the DVD player to a television via Composite Video you

will need

• an audio/video RCA cinch cable (supplied)

• Connect the yellow marked video socket with the yellow

VIDEOsocket

on the television.

• Connect the audio output sockets

L/R on the rear panel of the DVD player

to the corresponding audio inputs on the television.

Make sure that the colour markings yellow, red and white correspond.

• For playback select the matching channel on your television Check with

the television's instruction manual on how you can set the AV channel.

• In the OSD menu select the menu item Video/Video output/RGB.

On this topic see also chapter 10.3 "Video settings: Video output.

8.4 Connection via component signal (YPbPr/progressive

scan and YUV)

This connection variant is only possible with very high grade televisions,

LCD/Plasma screens or Video projectors

Check with the instruction manual of the corresponding playback device to see

if this connections variant is available. It is possible that additional playback

device settings may have to be implemented.

The so called "Component signal" is put out via the YPbPr socket of the DVD

player. Component signals are available in the form of the so called "YUV"

signal (Half image) as well as in the form of the so called "YPbPr" signal

(Full image/Progressive scan).

On this topic, please refer to Section 18. "Glossary / KeyWord

Index“.

Note:

For both variants the television, to which you want to connect the DVD

player, must be equipped with two audio "IN" cinch sockets.

The cable connections are the same in both cases; YPbPr-signal for Progressive

Scan however can only be used if the television (or Video projector), to which

you want to connect the DVD player, is capable of Progressive Scan.

If you are not sure whether the television (or Video projector), to which you

want to connect the DVD player is capable of Progressive Scan and has

cinch sockets available then you can check this by consulting the television's

(or Video projectors's) instruction manual.

IB_KH6517_18_DVDPlayer_LB6.qxd 23.01.2008 19:07 Uhr Seite 7

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest KH6517 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest KH6517

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info