Bedienungsanleitung Silvercrest SAS 150 A1 IAN 61458 (Seite 34 von 44) (Englisch, Portugiesisch, Spanisch)

738602

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

34 GB/MT

Cleaning and maintenance



Cleaning and maintenance



Cleaning

Important safety advice for

cleaning the slicer

1. Before starting to clean the electric Multi-Pur-

pose Slicer; switch it oﬀ, remove the power ca-

ble

from the mains socket and set the food

support plate

into the „0“ setting.

2. Do not submerse the electric Multi-Purpose

Slicer in water.

ATTENTION! RISK OF SERIOUS

INJURY: The cutting blade

is very sharp!

Accessories suitable

for dishwashers!

 Clean the food carriage

, the food holder

plate

, the cutting blade

and the slice

tray

in the dishwasher.

 It is necessary to clean the electric Multi-Pur-

pose Slicer thoroughly at regular intervals as

perishable food scraps could accumulate on

the appliance or behind the cutting blade

 Clean all appliance parts not suitable for the

dishwasher with a lightly moistened cloth.

Wipe oﬀ the appliance housing

, the cutting

blade covering

, the support table with

guide slots

and the food support plate

carefully. Do not use abrasive cleaning agents,

sponges with rough surfaces or hard brushes.

Cleaning brush:

ATTENTION! RISK OF PERSONAL INJU-

RY! Carry out all tasks using the cleaning brush

(see Fig. F) with great care. Should it slip

close to the cutting blade

, there is the risk

of receiving a severe personal injury.

 Use the bristles of the cleaning brush

to re-

move remnants such as crumbs from all diﬃcult

to reach positions. The ﬂattened end can be

excellently used to remove stubborn soiling.



Maintenance / Removing /

assembling the cutting blade

Important safety notices for

the removal and assembly of

the cutting blade!

1. Switch the slicer oﬀ, remove the plug from the

power socket and set the food support plate

into position „0“.

ATTENTION! RISK OF PERSONAL

INJURY! The cutting blade

is very sharp!

For the removal and assembly wear appropriate

safety gloves. Otherwise, you could receive cut

injuries.

 Open the blade cover

by pressing the

blade cover unlock button

. Remove the

blade cover

 Remove the plastic screw clip

from the

mounting (see Fig. E) and screw the blade lock

of the cutting blade

out by unscrewing it to

the left.

 When taking out the blade

make sure that

you grasp it at its centre.

 The cutting blade

can be cleaned in the

dishwasher.

 Clean the housing behind the cuttingblade

with a dry cloth or a soft brush.

 Re-assemble the cutting blade

in a reverse

sequence of the above instructions.

 Due to the special sawtoothing and the high

quality, the cutting blade

will retain its

sharpness for a very long time. A resharpening

of the cutting blade is not necessary. Consult

the service centre for your country if you have

questions about the cutting blade



Special accessories

Round cutter:

An untoothed cutting blade, speciﬁcally for the

ﬁnest of slices, is also available.

Orders for special accessories are be directed to

the service centre for your country.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SAS 150 A1 IAN 61458 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest SAS 150 A1 IAN 61458

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info