Bedienungsanleitung Silvercrest SBB 850 A1 - IAN 56430 (Seite 12 von 91) (Englisch, Dänisch, Schwedisch, Finnisch)

575520

Zoom out

Zoom in

Vorherige Seite

1/91

Nächste Seite

- 10 -

• Briefly press the Start/Stop button ạ to interrupt

the programme at the very start of the baking

phase or, remove the power plug from the wall

socket. Ensure that you re-insert the power plug

within 10 minutes so that the baking process can

be continued.

• Open the appliance lid ᕢ and remove the

baking mould ¶. You can take the dough out

with floured hands and remove the kneading

paddles ².

• Lay the dough back into the baking mould ¶.

Replace the baking mould ¶ and close the

appliance lid ᕢ.

• Insert the power plug into the wall socket. The

baking programme continues from where it

was stopped.

Allow the bread to cool for 15-30 minutes before

eating it.

Before cutting the bread, ensure that the kneading

paddles have been removed ².

Error Messages

• If the display Ạ shows "HHH" after the programme

has been started, it indicates that the temperatu-

re in the Bread Baking Machine is still too high.

Stop the programme and remove the power plug.

Open the appliance lid ᕢ and allow the machine

to cool down for 20 minutes before re-using it.

• If a new Programme cannot be started directly

after the Bread Baking Machine has completed

a baking process, it means the appliance is still

too hot. In this case the display panel reverts to

the default setting (Programmme 1). Open the

appliance lid ᕢ and allow the machine to cool

down for 20 minutes before re-using it.

ƽ Warning

Do not attempt to take the appliance into use before

it has cooled itself down. This functions only with

Programmme 12.

• If the display shows "EE0", "EE1" or "LLL" after

the programme has been started, first of all

switch the Bread Baking Machine off and then

back on by removing and then re-inserting the

power plug from/into the wall socket. Should the

error display continue, make contact with

Customer Services.

Cleaning and Care

ƽ Warning

Before cleaning it, always remove the power plug

from the wall socket and allow the appliance to

cool down completely.

Protect the appliance against moisture, this could

cause you to receive an electric shock.

Please also observe the safety instructions.

ƽ Important

The appliance and its ancillaries are not suitable

for being cleaned in a dish washing machine!

Housing, lid, baking space

Remove all particles left behind inside the baking

area using a wet cloth or a slightly wet soft sponge.

Wipe the housing and the lid too, only with a moist

cloth or sponge.

• Ensure that the interior is completely dry. For

easier cleaning, the appliance lid ᕢ can be

removed from the housing:

• Open the appliance lid ᕢ until the wedge-

shaped hinge cams pass through the openings

of the hinge guides.

• Pull the appliance lid ᕢ out of the hinge guides.

IB_56430_SBB850A1_LB3 24.08.2010 10:29 Uhr Seite 10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SBB 850 A1 - IAN 56430 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest SBB 850 A1 - IAN 56430

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info