Bedienungsanleitung Silvercrest SBB 850 A1 - IAN 96769 (Seite 62 von 69) (Deutsch, Englisch, Holländisch)

575519

Zoom out

Zoom in

Vorherige Seite

1/69

Nächste Seite

- 59 -

ƽ Important!

The appliance and its ancillaries are not suitable

for being cleaned in a dish washing machine!

Do not use any chemical cleaning agents or

solvents to clean the Bread Maker.

Housing, lid, baking space

Remove all particles left behind inside the baking

area using a wet cloth or a slightly wet soft sponge.

Wipe the housing and the lid too, only with a moist

cloth or sponge.

• Ensure that the interior is completely dry. For

easier cleaning, the appliance lid ᕢ can be

removed from the housing:

• Open the appliance lid ᕢ until the wedge-

shaped hinge cams pass through the openings

of the hinge guides.

• Pull the appliance lid ᕢ out of the hinge guides.

• To reassemble the appliance lid ᕢ, guide the

hinge cams through the opening of the hinge

guides.

Baking mould, kneading paddles

and accessories

ƽ Important!

Never submerse the baking mould ¶ in water or

other liquids.

The surfaces of the baking moulds ¶ and knea-

ding paddles ² have a non-stick coating. When

cleaning the appliance do not use aggressive

detergents, cleaning powders or objects that may

cause scratches to the surfaces.

Due to moisture and vapours the surfaces of

various parts may undergo changes in their appea-

rance over a period of time. This has no influence

on the function nor does it reduce the quality of the

baking results.

• Before cleaning, remove the baking mould ᕧ

and the kneading paddles ² from the baking

chamber.

• Take the kneading paddles ² out of the baking

mould ᕧ. Should the kneading paddles ² not

come out of the baking mould ᕧ, fill the baking

mould ᕧ with hot water for around 30 min. The

kneading paddles ² should now come out easily.

Clean the kneading paddles ² in warm water

containing a mild detergent. If there are any stub-

born encrustations, allow the kneading paddles ²

to soak in the rinsing water until the encrustations

come away with the aid of a washing-up brush.

Should the mountings in the kneading paddles ²

be blocked, these can be carefully cleaned with

a wooden toothpick.

After cleaning, dry the kneading paddles ² tho-

roughly.

• Wipe the external surfaces of the baking mould ᕧ

with a damp cloth.

• Clean the internal areas of the baking mould ᕧ

with warm water containing a little detergent. If

there are any encrustations in the baking mould ᕧ,

fill the baking mould ᕧ with water and add a

little mild detergent. Allow this to stand for as

long as necessary until the encrustations are

soaked and can be removed using a washing-up

brush. After this, rinse the baking mould ᕧ with

plenty of clean water and then dry it thoroughly.

• Clean the measuring cup ᕨ, the measuring

spoon ᕩ and the kneading paddle remover µ

in warm water and add a mild detergent.

Afterwards, rinse the parts with plenty of clean

water to remove all detergent residues.

Dry everything thoroughly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SBB 850 A1 - IAN 96769 Seite 62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest SBB 850 A1 - IAN 96769

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info