Bedienungsanleitung Silvercrest SBB 850 C1 - IAN 278855 (Seite 14 von 90) (Deutsch, Englisch, Holländisch, Französisch)

659207

Zoom out

Zoom in

Vorherige Seite

1/90

Nächste Seite

SBB 850 C1

│

11 ■

WARNING! RISK OF FIRE!

► Never use quantities greater than those speci-

ﬁ ed. If there is too much dough, some could

spill over the baking mould 7, drop onto the

hot heating elements and cause a ﬁ re.

■ Ensure that you measure the ingredients precisely.

Even small deviations from the quantities speciﬁ ed

in the recipe may aﬀ ect the baking results.

Baking bread

Preparation

NOTE

►

Place the bread maker on a level and ﬁ rm

surface.

1) Pull the baking mould 7 upwards and out of

the appliance.

2) Push the kneading blades 6 onto the drive

shafts in the baking mould 7. Ensure that they

are ﬁ rmly seated.

3) Add the ingredients into the baking mould 7.

First add the liquids, sugar and salt, then the

ﬂ our. Add the yeast as the last ingredient.

NOTE

►

Ensure that the yeast does not come into

contact with salt or liquids.

4) Insert the baking mould 7 again. Ensure that it

clicks into place correctly.

5) Close the appliance lid 2.

6) Put the power plug into the mains power socket.

You will hear a beep and the programme

number and the duration for programme 1

will appear on the display .

7) Select the programme you want using the

programme select button . Every input is

acknowledged with a beep.

8) If necessary, use button  to select the size

of bread you want to bake.

9) Select the required level of browning  for

your bread. The arrow on the display  shows

you if you have selected, light, medium or dark.

Here you can also select the setting "Super

Rapid" to shorten the time during which the

dough rises.

NOTE

►

A browning level cannot be selected for

programmes 6, 7 and 11.

The function "Rapid" is only available for

programmes 1–4.

A bread weight cannot be selected for pro-

grammes 6, 7, 11 and 12.

10) You now have the option of setting the end time

of your programme using the timer function.

You can enter in a maximum time delay of up

to 15 hours.

NOTE

►

This function is not available for programme 11.

Starting a programme

Start the programme with the Start/Stop button .

NOTE

►

Programmes 1, 2, 3, 4, 6 and 8 start with a

10 to 30 minute preheating phase (except

Super Rapid, see table for programme se-

quences). The kneading blades 6 do not move.

This is not a malfunction of the appliance.

The programme will carry out the various operations

automatically.

NOTE

►

For the programmes 1, 2, 3, 4, 5, 8, 9 and

10, you will hear a beep after the "Rise 2"

programme section and "RMV"  appears

on the display . You can now remove the

kneading blades 6 from the dough. If you do

not want to remove the kneading blades 6,

simply wait. The appliance will automatically

resume the programme.

IB_278855_SBB850C1_LB6_FR_NL.indb 11 08.09.16 13:08

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SBB 850 C1 - IAN 278855 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest SBB 850 C1 - IAN 278855

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info