Bedienungsanleitung Silvercrest SBB 850 EDS A1 - IAN 73485 (Seite 57 von 66) (Deutsch, Englisch, Holländisch)

575516

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

- 55 -

Error Messages

• If the display Ạ shows "HHH" after the programme

has been started, it indicates that the temperatu-

re in the Bread Baking Machine is still too high.

Stop the programme and remove the power plug.

Open the appliance lid ᕢ and allow the machine

to cool down for 20 minutes before re-using it.

• If a new Programme cannot be started directly

after the Bread Baking Machine has completed

a baking process, it means the appliance is still

too hot. In this case the display panel reverts to

the default setting (Programme 1). Open the ap-

pliance lid ᕢ and allow the machine to cool

down for 20 minutes before re-using it.

ƽ Warning!

Do not attempt to take the appliance into use before

it has cooled itself down. This functions only with

Programmme 12.

• If the display shows "EE0", "EE1" or "LLL" after

the programme has been started, first of all

switch the Bread Baking Machine off and then

back on by removing and then re-inserting the

power plug from/into the wall socket. Should the

error display continue, make contact with

Customer Services.

Cleaning and Care

ƽ Warning!

Before cleaning it, always remove the power plug

from the wall socket and allow the appliance to

cool down completely.

Protect the appliance against moisture, this could

cause you to receive an electric shock.

Please also observe the safety instructions.

ƽ Important!

The appliance and its ancillaries are not suitable

for being cleaned in a dish washing machine!

Housing, lid, baking space

Remove all particles left behind inside the baking

area using a wet cloth or a slightly wet soft sponge.

Wipe the housing and the lid too, only with a moist

cloth or sponge.

• Ensure that the interior is completely dry. For

easier cleaning, the appliance lid ᕢ can be

removed from the housing:

• Open the appliance lid ᕢ until the wedge-

shaped hinge cams pass through the openings

of the hinge guides.

• Pull the appliance lid ᕢ out of the hinge guides.

• To reassemble the appliance lid ᕢ, guide the

hinge cams through the opening of the hinge

guides.

Baking moulds and kneading paddles

The surfaces of the baking moulds ¶ and knea-

ding paddles ² have a non-stick coating. When

cleaning the appliance do not use aggressive

detergents, cleaning powders or objects that may

cause scratches to the surfaces.

Due to moisture and vapours the surfaces of

various parts may undergo changes in their appea-

rance over a period of time. This has no influence

on the function nor does it reduce the quality of the

baking results.

Before cleaning, take the baking moulds ¶ and

kneading paddles ² out of the baking area. Wipe

the outside of the baking moulds ¶ with a damp

cloth.

IB_73485_SBB850EDSA1_LB1.qxp 29.03.2012 15:33 Uhr Seite 55

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SBB 850 EDS A1 - IAN 73485 Seite 57

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest SBB 850 EDS A1 - IAN 73485

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info