Bedienungsanleitung Silvercrest SBLL 5A1 - IAN 293932 (Seite 16 von 43) (Deutsch, Englisch, Holländisch, Französisch)

694657

Zoom out

Zoom in

Vorherige Seite

1/43

Nächste Seite

16 GB/IE

 Technical data

Rechargeable battery type: Lithium Polymer

Battery capacity: 3.7 V, 1300 mAh

Output power: 5 W (RMS)

Bluetooth

version: 2.1

Bluetooth device name: SBLL 5 A1

Operation distance: approx.10 m

Frequency response: 100 Hz to 20 kHz

Impedance: 4 Ω

Degree of protection: IPX7 (protection

against the eﬀects of

temporary immersion

in water for up to

30 minutes)

Charging time: 3 hours

Operation time: 5 hours

(at 70 % volume)

Frequency band: 2402 – 2480 MHz

Max. transmitted power: 10 dBm

The speciﬁcation and design may be changed

without notiﬁcation

 Before use

NOTES:

 All parts have to be unpacked and the

packaging material has to be removed

completely.

 Before use, verify the package contents are

complete and undamaged!

 Charging

 This product is equipped with a built-in

rechargeable Lithium Polymer battery. Fully

charge the product before use.

 Connect the micro-USB cable

with the USB

charging jack

and the USB port of a PC or

a suitable USB charging power source.

 The operating time for the product is 5 hours –

medium volume level (70 % volume).

NOTES:

 The red LED

lights up when charging and

goes out once charging is completed. The

charging time takes approx. 3 hours.

 When the battery is low the voice prompt

says

“Battery low”

every 5 minutes to prompt

charging. If the product does not get recharged

after 15 minutes, the product is switching oﬀ

and the voice prompt says

“Power oﬀ”

 Once charging is complete, disconnect the

micro-USB cable

from the power source.

 Operation

 Bluetooth connection

 Switching on: Press and hold

until the

blue LED

ﬂashes. The voice prompt says

“Power on”

. The blue LED

ﬂashes slowly.

 The voice prompt says

“Pairing...”

. The blue

LED ﬂashes

quickly. The product has

entered into pairing mode.

 Activate Bluetooth

on your Bluetooth

device.

 Search for the products’ Bluetooth

name

SBLL 5 A1 to enable pairing. When a

connection is established, the voice prompt

says

“Your device is connected”

and the blue

LED

lights continuously.

 Playing music: Press

to play / pause

music.

 Increasing/decreasing volume: Press or

press and hold +

or –

NOTE:

A signal tone will sound when the maximum/

minimum vol ume level has been reached.

 Switching oﬀ: Press and hold

. The

voice prompt says “

Power oﬀ

”.

NOTES:

 The product automatically connects with

devices it has already been paired with before.

 Once paired, the product automatically

switches oﬀ after 15 minutes if the product is

not playing.

 When disconnecting the product after

pairing, the voice prompt says

“Your device

is disconnected”

. The blue LED

ﬂashes

quickly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SBLL 5A1 - IAN 293932 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info