Bedienungsanleitung Silvercrest SBS 1400 A1 IAN 57229 (Seite 17 von 30) (Englisch, Spanisch)

737541

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

Unpacking and assembling

2 Unpacking and assembling

2.1 Unpacking

1. Unpack the appliance and all its accesso-

ries.

2. Check the contents for completeness and

possible damages. Information regarding

scope of delivery (Fig. 1).

2.2 Assembly

1. Insert the end of the suction hose in the in-

take opening (Fig. 2) of the cylinder vacu-

um cleaner, until it locks with an audible

click.

2. Insert the handle (Fig. 3/1) into the upper

end of the telescopic tube (Fig. 3/2).

3. Attach the floor nozzle (Fig. 3/3) to the bot-

tom end of the telescopic tube (Fig. 3/4).

4. Adjust the length of the telescopic tube.

Press down the release latch on the tube

(Fig. 4/1) to do this. Then extend the tele-

scopic tube to the desired length. Let go of

the release catch while pulling until it locks

in place. You will hear a distinct click.

Your cylinder vacuum cleaner is now ready for

use.

2.3 Using further nozzles (acces-

sories)

Besides the floor nozzle you just attached, you

may extend the functions of your cylinder vac-

uum cleaner with other nozzles.

 The supplied accessories include:

- Crevice nozzle (Fig. 5/1)

For vacuuming spots difficult to reach.

- Furniture brush (Fig. 5/2)

For cleaning delicate surfaces.

- Upholstery nozzle (Fig. 5/3)

For gentle vacuuming of upholstered fur-

niture.

 Optionally available are:

- Turbo brush (Fig. 6/1)

For thoroughly deep cleaning of carpets

with the revolving brush head.

- Parquet brush (Fig. 6/2)

For vacuuming especially delicate surfac-

es (e.g. parquet, laminate) with long, soft

bristles.

 This is how to attach the nozzles:

1. Switch off the vacuum cleaner and pull the

plug from the mains socket.

2. Pull off the attached nozzle.

3. Attach the desired nozzle to the bottom end

of the telescopic tube (Fig. 7/1) or if neces-

sary directly to the handle (Fig. 8/1).

4. If possible, store nozzles no longer in use

on the accessory bracket (Fig. 1/2).

ATTENTION:

Always transport or ship the appliance in its

original packaging to avoid damage. Keep

the packaging for such an event.

Dispose of no longer needed packaging

material according to the applicable regula-

tions of your country.

NOTE:

Immediately contact your dealer if you have

found damage resulting from transportation.

WARNING:

Danger of injury! Only assemble the appli-

ance if it is not connected to the power sup-

ply. Otherwise the machine might start up

and parts of your body, hair or pieces of

clothing might be sucked in.

NOTE:

It might be necessary to push a bit harder.

NOTE:

The brush rotating at high speed causes a

loud noise during operation.

WARNING:

Danger of injury! Only assemble the appli-

ance if it is not connected to the power sup-

ply. Otherwise the machine might start up

and parts of your body, hair or pieces of

clothing might be sucked in.

ATTENTION:

Use only intact nozzles. Damaged nozzles

may scratch or damage surfaces and

objects.

ATTENTION:

Using the cylinder vacuum cleaner without a

nozzle attached increases the danger of

accidentally sucking in objects.

SBS 1400 A1_LB5.book Seite 17 Montag, 13. September 2010 6:24 18

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SBS 1400 A1 IAN 57229 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest SBS 1400 A1 IAN 57229

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info