Bedienungsanleitung Silvercrest SDB 2200 D2 - IAN 273029 (Seite 20 von 24) (Deutsch, Englisch)

645203

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

- 17 -

Turning off the steam iron

• Remove the plug from the wall socket.

• Empty the water tank and clean the ironing

sole q.

• Put the steam iron on the appliance base 0

after it has cooled down.

Drip-stop function

With conventional steam irons it can occur that water

drips from the ironing sole q at low temperatures. Ho-

wever, this iron possesses a new equipment characteri-

stic, the DRIP-STOP function. At low temperatures the

iron automatically switches off the steam-blast function.

When this happens, a "CLICK" is heard. You must then

select a suitable temperature using the thermostat 8. As

soon as this is reached, steam production continues.

Automatic switch-off

The iron is equipped with an automatic switch-off. This

stops the iron from heating up.

If the iron is standing on its ironing sole q and has not

been moved for approx. 30 seconds, acoustic warning

signals are heard and the automatic switch-off indicator

lamp 6 flashes. The iron will no longer be heated. To

deactivate the automatic switch-off, pick up the iron and

move it around a little. The automatic switch-off indicator

lamp 6 will go off and the iron will heat up again.

If the iron is standing on its base 0 and has not been

moved for approx. 8 minutes, acoustic warning signals

are heard and the automatic switch-off indicator lamp

6 flashes. The iron is no longer heated. To deactivate

the automatic switch-off, pick up the iron and move it

around a little. The automatic switch-off indicator lamp

6 will go off and the iron will heat up again.

Note:

The automatic switch-off is not a substitute for unplug-

ging the apparatus from the power supply! It is only in-

tended for reducing the risk of fire if the iron is acciden-

tally left on!

Cleaning

Self-cleaning function

• Fill the water tank to the "MAX" marking.

• Insert the plug into a wall socket.

• Move the thermostat 8 to the "MAX" position.

• Adjust the steam regulator 3 to maximum steam po-

wer.

• Allow the steam iron to heat up until the temperature

control lamp 7 switches off and once again glows.

• Hold the steam iron horizontally over a catchment

receptacle.

• Press and hold down the self-clean button w. Move

the steam iron back and forth a little.

Steam and boiling water flows from the steam exit

holes in the ironing sole q.

Impurities that may be present are washed out.

• Release the self-clean button w as soon as all

of the water has exited.

• Thoroughly dry the ironing sole q. For this, slide the

ironing sole q back and forth over a hand towel or

an old piece of material several times.

• Allow the steam iron to cool down before placing it

in storage.

IB_273029_SDB2200D2_LB1.qxp 26.08.2015 11:13 Uhr Seite 17

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SDB 2200 D2 - IAN 273029 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest SDB 2200 D2 - IAN 273029

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info