Bedienungsanleitung Silvercrest SDB 2400 A1 - IAN 66493 (Seite 46 von 62) (Englisch, Italienisch, Portugiesisch, Spanisch)

679066

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

- 44 -

• Close the water fill opening 2 to the water tank 1.

Ensure that the lug on the water fill opening 2

sits in the indentation on the lid. Only in this way

is the water tank 1 properly closed.

• Replace the water tank 1 back onto the appliance.

The water tank 1 must audibly engage with the

unlocking device for the water tank 4.

Attaching/detaching the brush

attachment

Attention!

NEVER attempt to attach or detach the brush attach-

ment w when the appliance is heated up. Risk of Burns!

• To use the steam and brush function, place the

brush attachment w onto the steam brush.

• To do this, slide the brush attachment w all the

way along the guide to the end. The unlocking

device of the brush attachment q must engage

audibly.

• To be able to use the ironing function, remove

the brush attachment w from the steam brush.

• To do this, press the unlocking device q down-

wards and, at the same time, pull the brush attach-

ment w away to the front.

Steam brush function

• Place the brush attachment w onto the applian-

ce. This must engage audibly with the unlocking

device on the brush attachment q.

• Insert the power plug 7 into a correctly installed

and earthed mains power socket.

• To generate steam, set the temperature regulator

3 to at least ••• or higher. The heating-up con-

trol lamp 5 glows. As soon as the set temperature

has been reached, the heating-up control lamp

5 goes out.

Note:

For the steam blast function, set the temperature

regulator 3 to at least •••.

At lower settings the temperature is not sufficient to

generate a steam blast.

• By pressing the steam blast button 8 you can

now produce jets of steam.

Note:

To release the first steam blast after heating the

appliance up, it can happen that you may need

to press the steam blast button 8 several times in

succession.

The appliance is now ready for use.

Attention!

The steam brush can be used with all clothing items.

Caution is to be exercised with heat-sensitive materials

such as synthetics, polyamides or artificial silk. With

these materials you should first check at a concealed

part (inside seam) that the hot steam will not cause

any damage to the garment. Do not touch these ma-

terials directly with the hot sole of the iron 0. Use

only the steam blast.

Clothing care

• Suspend the crumpled garment from a coat hanger.

• With one hand pull the garment flat, then steam it

from top to bottom. The combination of steam and

clothes brush r will gently remove all creases.

• Use light pressure with the clothes brush r and

guide the appliance from top to bottom over the

garment. You can thereby press the steam blast

button 8 in short intervals.

Note:

You can repeatedly press the steam blast button 8

until the heating-up control lamp 5 glows or water

drips from the sole of the iron 0.

Then, wait until the heating-up control lamp 5 extin-

guishes before activating a further blast of steam.

IB_68982_SDRB1000A1_LB5 17.08.2011 11:39 Uhr Seite 44

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SDB 2400 A1 - IAN 66493 Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest SDB 2400 A1 - IAN 66493

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info