Bedienungsanleitung Silvercrest SDB 2400 E3 - IAN 279179 (Seite 11 von 83) (Deutsch, Englisch, Holländisch, Dänisch, Französisch)

656664

Zoom out

Zoom in

Vorherige Seite

1/83

Nächste Seite

7. Finish ironing, set the temperature con-

troller|15 to MIN and pull out the

mains plug|10.

8. Allow the steam iron to cool down, and

pour off any remaining water from the

water tank|13 through the filling open-

ing in the water tank (under the lid|2).

6.5 Ironing with steam

Steam ironing requires a high temperature,

at least the temperature setting for . In or-

der to additionally dampen items of cloth-

ing, the spray function is also available.

1. Set the steam flow rate control|3 to

and set the temperature controller|15 to

MIN.

2. Fill the water tank|13.

3. Place the steam iron on the base unit|12.

4. Connect the mains plug|10 with the

wall socket.

5. Set the temperature controller|15 to the

desired temperature (at least ). The

temperature control lamp |7 lights

up.

6. As soon as the ironing temperature has

been reached and the temperature control

lamp |7 goes out, adjust the steam

flow rate controller|3 to the desired steam

flow rate and start ironing.

The steam will ...

… start to come out as soon as you hold

the steam iron horizontal, and

… stop as soon as:

- you hold the steam iron vertically,

- you place the steam iron on the base

unit|12,

- the temperature is too low,

- the water tank|13 is empty

- you set the steam flow rate control-

ler|3 to .

7. Finish ironing, set the temperature con-

troller|15 to MIN, set the steam flow

rate controller|3 to and pull out the

mains plug|10.

8. Allow the steam iron to cool down, and

pour off any remaining water from the

water tank|13 through the filling open-

ing in the water tank (under the lid|2).

6.6 Steam jet function

The steam jet function requires a high tem-

perature. Select a temperature setting be-

tween and MAX. For this purpose, the

water tank|13 must be at least one quarter

full. The steam flow rate controller|3 is locat-

ed to the left on the symbol .

• Press the steam jet button while the

steam iron glides over the item of laun-

dry|4 .

• Wait a few seconds before you press

the steam jet button|4 again.

NOTE:

• For smoothing items of clothing that are

hanging up, you can use the steam jet

Button in a vertical position.

7. Safety shut-off

DANGER! - Fire hazard!

Despite the automatic switch-off, the

steam iron must not be left

unsupervised.

Your steam iron possesses a safety shut-off of

the heating function (AUTO SHUT OFF).

Activating the function

7he automatic switch-off occurs, if

- the device has stood still in vertical posi-

tion for approx. 8 minutes.

- the device has stood still on the sole

plate for approx. 30 seconds.

- the device has laid on its side for ap-

prox. 30 seconds.

BB1$6B%XHJHOHLVHQB%ERRN6HLWH)UHLWDJ2NWREHU

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SDB 2400 E3 - IAN 279179 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info