Bedienungsanleitung Silvercrest SDBK 2200 A1 - IAN 77153 (Seite 28 von 32) (Französisch)

618686

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

- 26 -

Attention!

• Should the clothing care instructions forbid iro-

ning, (Symbol ), the clothing item may not be

ironed. If you do so, the clothing item could be

permanently damaged.

• The water tank is to be filled exclusively with

mains or distilled water. You will otherwise da-

mage the steam iron.

• You may not clean the steam iron with solvents,

alcohol or abrasive cleaning agents. These

could damage it.

Before the First Use

• Remove the steam iron from the packaging.

• Remove all protective coverings and protective

foils from the steam iron and from the ironing

sole e.

Risk of asphyxiation!

Plastic bags can be dangerous. To avoid the risks of

asphyxiation, keep plastic bags out of the reach of

toddlers and small children.

• Pour water into the water tank (see chapter

"Filling the water tank").

• Connect the steam iron with the cable base 8

and with the station q (see chapter "Instructions

for Use").

• Insert the plug into a wall power socket supply-

ing an electrical current as detailed on the rating

plate.

• Place the temperature regulator 7 into the posi-

tion "MAX".

• Heat the steam iron up for several minutes at this

highest setting.

• Remove the steam iron from the station q

(see chapter “Tips for utilisation”).

• Press the button for the steam blast 5 a few ti-

mes such that steam exits from the ironing sole e.

• Then iron a piece of material that is no longer

required, to remove possible contamination from

the ironing sole e.

Tips for utilisation

In addition to the typical utilisation with a cable,

you can also separate the steam iron from the cable

base 8 for a short period to iron textiles which are

not located close to an electrical power socket.

To separate the steam iron from the cable base 8:

• Place the steam iron, with the cable base 8

engaged, onto the station q. The unlocking

switch 0 must be in the position .

• Slide the unlocking switch 0 into the

position . The steam iron now allows itself

to be lifted off. The cable base 8 remains

combined with the station q.

Note:

As the steam iron cannot be heated up without the

cable base 8, you can only work for a short period

without the cable base 8. Reconnect the steam iron

with the cable base 8 as soon as the steam blast

or the ironing quality diminishes.

To reconnect the steam iron with the cable base 8:

• Insert the steam iron into the cable base 8

connected to the station q. Slide the unlocking

switch 0 to . You can now lift the steam

iron with the cable base 8 from the station q.

Should you wish to secure the steam iron to the

station q, for safekeeping for example, slide the un-

locking switch 0 with the preplaced steam iron to .

The steam iron can now no longer be removed from

the station q.

IB_77153_SDBK2200A1_LB2 13.07.2012 8:03 Uhr Seite 26

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SDBK 2200 A1 - IAN 77153 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest SDBK 2200 A1 - IAN 77153

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info