Bedienungsanleitung Silvercrest SDBK 2400 E4 - IAN 279757 (Seite 11 von 86) (Deutsch, Englisch, Holländisch, Dänisch, Französisch)

656666

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

- MIN the device is not getting hot

÷ temperature: up to

approx. 110 °C

(synthetic materials)

÷÷ temperature: up to

approx. 150 °C

(Silk, wool)

÷÷÷ temperature: up to

approx. 210 °C

(linen, cotton)

- MAX maximumtemperature

2. The temperature control lamp|14 is lit

for as long as the steam iron is heating.

It goes out when the set temperature has

been reached. You can then begin iron-

ing.

7.3 Spray function

Use the spray function in order to dampen

dry items of laundry. This option is available

irrespective of the set temperature. For this

purpose, the water tank|15 must be at least

one quarter full.

• Repeatedly press the spray button|5 .

While doing so, hold the steam iron

horizontally with the tip over the item of

laundry. Ensure that no water sprays

onto the ground.

7.4 Ironing without steam

Sensitive fabrics are ironed at lower temper-

atures and without steam. In order to damp-

en them, the spray function is available.

1. Set the steam flow rate control|3 to

and set the temperature controller|17 to

MIN.

2. Fill the water tank|15 if you wish to use

the spray function.

3. Place the steam iron in the stand|7.

4. Connect the mains plug with the wall

socket.

5. Set the desired temperature using the

temperature controller|17. The tempera-

ture control lamp|14 lights up.

6. Start ironing as soon as the ironing tem-

perature has been reached and the tem-

perature control lamp|14 goes out.

7. Finish ironing, set the temperature con-

troller|17 to MIN and pull out the

mains plug.

8. Allow the steam iron to cool down, and

pour off any remaining water from the

water tank|15 through the filling open-

ing in the water tank (under the lid|2).

7.5 Ironing with steam

Steam ironing requires a high temperature,

at least the temperature setting for . In or-

der to additionally dampen items of cloth-

ing, the spray function is also available.

1. Set the steam flow rate control|3 to

and set the temperature controller|17 to

MIN.

2. Fill the water tank|15.

3. Place the steam iron in the stand|7.

4. Connect the mains plug with the wall

socket.

5. Set the temperature controller|17 to the

desired temperature (at least ). The

temperature control lamp|14 lights up.

6. As soon as the ironing temperature has

been reached and the temperature con-

trol lamp|14 goes out, adjust the steam

flow rate controller|3 to the desired

steam flow rate and start ironing.

The steam will ...

… start to come out as soon as you hold

the steam iron horizontal, and

… stop as soon as:

- you hold the steam iron vertically,

- you place the steam iron into the

stand|7,

- the temperature is too low,

- the water tank|15 is empty

- you set the steam flow rate control-

ler|3 to .

BB1$6B%XHJHOHLVHQB%ERRN6HLWH0RQWDJ$XJXVW

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SDBK 2400 E4 - IAN 279757 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info