796208
12
Zoom out
Zoom in
Vorherige Seite
1/54
Nächste Seite
11 GB/IE/NI
If the tap water in your location is rated as hard,
it is recommended that you mix the tap water
with some distilled water. Otherwise limescale
deposits can adversely affect the product's
functions.
Mix the tap water with distilled water:
Water
hardness
Ratio of distilled
water to tap water
Very soft/soft
Medium 1:1
Hard 2:1
Very hard 3:1
NOTE: Check the hardness of your household's
water with your local water supplier.
Do not add water with any additives (such as
starch, perfume, softeners or other chemicals)
to the water tank
11
. These could damage
the product as residues can form in the steam
chamber. The residues could contaminate the
clothing if they come out of the steam outlets.
Fill the water tank
11
with water through the
filling aperture
19
. Observe the MIN/MAX
markings on the water tank:
Marking Water fill level
MIN Minimal water fill level
(approx. 220 ml)
MAX Maximum water fill level
(approx. 1800 ml)
Push the water tank
11
back into the base station
12
until it locks into place.
Setting the temperature
Turn the temperature control 4 from the
min position to the desired temperature level.
mATTENTION! Risk of property damage!
Before steam smoothing: Check the clothes'
ironing instructions to determine if they are
suitable for use with this product
For clothes with the following ironing instructions:
Do not iron
The temperature control 4 is divided into
3 ranges. These are rough recommendations for
different types of fabrics:
Symbol Ironing process
Low temperature
For synthetic fabrics (e.g. nylon)
Average temperature
For sensitive fabrics (e.g. silk or wool)
High temperature
For coarse fabrics (e.g. cotton or linen).
max Highest temperature
For steam ironing
Unlock the steam iron
Push the lock switch
16
to the left .
The steam iron 1 can now be removed from the
storage platform 9 of the base station
12
.
Ironing (without steam)
Turn the temperature control 4 to the
min position.
Connect the power plug
15
to a suitable power
socket.
Switching on the product: Press
26
. flashes
blue and is then lit continuously. Simultaneously,
the heat indicator
29
flashes red and then is lit
continuously in the display 6.
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Silvercrest SDBS 2400 C1 - IAN 321613 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info